How to replace the rear sliding door striker on Chevrolet Venture?

Question

Accepted Answer

The first step to replace the rear sliding Door Lock striker requires removal of both sliding Door Striker screws and sliding Door Striker along with its accompanying shim from the c-pillar. Return the sliding Door Striker in addition to the shim by attaching them to the c-pillar. The strikers enter a stubbed caged nut to achieve approximately 4 mm (0.15 in) of adjustment through an oversized receptacle. After ensuring the striker cannot properly engage the Door Lock, follow the procedures for rear side door up/down adjustment along with rear side door front edge in/out adjustment and rear side door rear edge in/out adjustment to complete necessary adjustments on the door. Apply the striker to ensure door flatness while maintaining its position through the hole but refrain from using it to elevate or descend the door. Check that the latch meets the center of the striker directly. You must add or remove shims for appropriate alignment if the position is incorrect. Secure the sliding Door Striker screws with 25 n.m (18 lb ft) tightness level.

OEM Chevrolet Venture Door Striker

4 Door Strikers found

Chevrolet Venture Striker Part Number: 86785938

Chevrolet Venture Striker, Black Part Number: 16629888

Chevrolet Venture Striker, Rear Part Number: 10353637

Chevrolet Venture Striker Part Number: 10352584

Chevrolet Venture Door Striker

Chevrolet Venture Door Striker Parts Questions & Experts Answers

Related Chevrolet Venture Parts

Browse Chevrolet Venture Door Striker by Years