Make sure this part fits

GM 10347139
Lock, Rear Passenger Side

1997-2008 GM

Customer Questions & Expert Answers (23)
GM 10347139 Lock, Rear Passenger Side
  • Part Description
    Lock Assembly-Rear Side Door Rear; Door Latch Assembly; Door Lock
  • Position
    Rear Passenger Side
  • Replaces
    10321723, 16675908
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    1997-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1997-2004 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    1999-2006 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    1997-1998 Pontiac Trans SportBase, Montana6 Cyl 3.4 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10347139 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10347139 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after securing the actuator for the 2005 Buick Terraza? Posted by Customer
    A:
    Reinstall the front door outside handle lock rod bracket and reconnect the electrical connectors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step in the installation process for the 2006 Buick Terraza? Posted by Customer
    A:
    Hook the latch/lock rod back to the sliding door latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What does removing the PSD 15A fuse do for the 2006 Buick Terraza? Posted by Customer
    A:
    It interrupts the low current logic power for both the LH and RH power sliding door modules, rendering them inoperative.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the final step after securing the actuator for the 2006 Buick Terraza? Posted by Customer
    A:
    Reinstall the outside handle lock rod bracket, reconnect the electrical connectors, and finally, reinstall the front door module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be reinstalled after the latch installation for the 2007 Buick Terraza? Posted by Customer
    A:
    The sliding door water deflector and the inner trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What happens after restoring the low current logic power for the 2007 Buick Terraza? Posted by Customer
    A:
    Both PSDMs become operational, although they will need to learn the full open and closed positions of the PSD.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the final step in removing the latch for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Remove the latch itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the final step in the process for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Restore the low current logic power by reinstalling the PSD 15A fuse into the instrument panel fuse block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after installing the new actuator for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Reinstall the front door outside handle lock rod bracket, reconnect the electrical connectors, and finally, install the front door lock module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step in the installation process for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Position the front door lock to the front door lock module and secure it to the door lock module bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you remove the rear lock from the sliding door for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Remove the rear lock from the sliding door after unhooking the lock rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock
    Q:
    What are the final steps after installing the new actuator for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Reinstall the water deflector and the inner trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the final step after installing the new actuator for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Finally, reconnect the wiring harness connector to the sliding door lock actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the next step after removing the water deflector for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Unscrew the sliding door latch screws.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock
    Q:
    What is the first step to replace the power sliding door lock actuator for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Begin by removing the sliding door inner trim panel and the sliding door water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step in the installation of the new sliding door lock actuator for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Position the new sliding door lock actuator to the sliding door lock, ensuring the mounting holes are aligned.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the lock actuator for the sliding door for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    First, remove the sliding door lock and disconnect the electrical connector from the sliding door lock actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How should the new latch release actuator be positioned for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Position it correctly and secure it with rivets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the next step after removing the screws for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Remove the actuator itself and unhook the actuator rod from the actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What are the final steps after installing the new latch for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Reinstall the sliding door water deflector and the sliding door inner trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step to replace the sliding door latch for the 2005 Chevrolet Venture? Posted by Customer
    A:
    First, remove the sliding door inner trim panel and the sliding door water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the second step in the installation process for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Reinstall the front door lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lock, Rear Passenger Side 10347139 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10347139 Lock, Rear Passenger Side is available in the market under the name GM Door Lock, Door Lock Actuator, Door Latch Assembly. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10347139 Lock, Rear Passenger Side fits certain Chevrolet Uplander, Venture models, as well as Buick Terraza. Additionally, it is compatible with Pontiac Montana, Trans Sport and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 10347139 maintains top performance when functioning as the Lock Assembly-Rear Side Door Rear; Door Latch Assembly; Door Lock unit at its Rear Passenger Side. The component 10347139 is constructed from durable material and its dimensions span 6.4 x 3.3 x 3.2 inches while weighing 1.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Latch; Lock, Rear Side Door; Lock, Door Lock. The part 10347139 has available replacement options 10321723, 16675908. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.