Make sure this part fits

GM 88937058
Lower Hinge, Rear Driver Side

2002-2009 GM

Customer Questions & Expert Answers (10)
GM 88937058 Lower Hinge, Rear Driver Side
  • Part Description
    Hinge Kit, Rear Side Door Lower (Door Side); Door Hinge
  • Position
    Rear Lower Driver Side
  • Manufacturer
    General Motors
Make sure this part fits
$14.09 MSRP: $22.05
You Save: $7.96 (37%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number88937058
    Part DescriptionHinge Kit, Rear Side Door Lower (Door Side); Door Hinge
    Other NamesHinge Kit, Door Hinge
    Item Dimensions6.9 x 4.3 x 4.3 inches
    Item Weight1.40 Pounds
    PositionRear Lower Driver Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU88937058
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 88937058 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88937058 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What are the steps for drilling holes for the service hinge for the 2006 Buick Rainier? Posted by Customer
    A:
    Drill a 3 mm (1/8 in.) pilot hole at each marked location, followed by drilling a 13 mm (1/2 in.) hole at each pilot hole location.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done to the bare-metal surfaces before aligning the hinge for the 2004 Buick Rainier? Posted by Customer
    A:
    Clean and prepare all bare-metal surfaces, applying an anti-corrosion primer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the hinge and backing plate be aligned for the 2003 Chevrolet Trailblazer? Posted by Customer
    A:
    Align the hinge and backing plate with the holes in the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should you do after locating the weld locations for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Punch the center of each weld for easier removal during drilling.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you prepare the mating surface for the new hinge for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Clean the remaining weld from the mating surface for a flush fit of the service hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after removing the check link bolt for the 2004 GMC Envoy? Posted by Customer
    A:
    Take out the front door wiring harness grommet from the body and disconnect the door wiring harness connectors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the last step in the process for the 2003 GMC Envoy? Posted by Customer
    A:
    Reinstall and align all related panels and components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after disconnecting the wiring harness for the 2004 GMC Envoy? Posted by Customer
    A:
    Remove the bolts that secure the rear door hinge keeper straps.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should you do if the hinge does not separate easily for the 2006 Chevrolet Trailblazer? Posted by Customer
    A:
    If necessary, use a chisel to separate the hinge from the mating surface and then remove the hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 88937058, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 88937058 Lower Hinge, Rear Driver Side. It is sometimes referred to as GM Door Hinge. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 88937058 Lower Hinge, Rear Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery