Make sure this part fits

GM 15011042
Belt Weatherstrip, Front Outer Passenger Side

1994-2005 GM

Customer Questions & Expert Answers (15)
GM 15011042 Belt Weatherstrip, Front Outer Passenger Side
GM 15011042 Belt Weatherstrip, Front Outer Passenger Side
  • Part Description
    Sealing Strip, Front Side Door Window Outer; Weatherstrip
  • Position
    Front Outer Passenger Side
  • Replaces
    15647880, 15159762
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1994-2004 Chevrolet S10Base, LS, SS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1995-2001 GMC JimmyBase, Diamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1994-2004 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1996-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15011042 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15011042 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    Where do you begin installing the drip channel for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Start at the upper rear corner of the front side door opening frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new door opening weatherstrip for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Position the pre-formed corner in the upper rear corner of the door opening and push the weatherstrip onto the pinch weld flange, starting at the pre-formed corner and working around the entire edge of the door opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Where should the seam of the weatherstrip be positioned during installation for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    The seam should be positioned at the center of the rear edge of the sunroof window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new weatherstrip for the 2002 Chevrolet S10? Posted by Customer
    A:
    Open the liftgate window and push the new weatherstrip onto the pinch-weld flange, starting with the pre-formed corner at either upper corner of the liftgate window opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after cleaning the flange for the 2004 Chevrolet S10? Posted by Customer
    A:
    Remove the liner from the adhesive strip and position the new seal to the cowl plenum, pressing it into place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after the silicone has dried for the 2003 Chevrolet S10? Posted by Customer
    A:
    Visually inspect the window and seal in both the full open and closed positions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What tool is used to remove the existing weatherstrip for the 2002 Chevrolet S10? Posted by Customer
    A:
    The Door Trim Pad Clip Remover (J 38778) is used.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Where should the weatherstrip seal be positioned for the 2002 Chevrolet S10? Posted by Customer
    A:
    Position the weatherstrip seal at the upper rear corner of the door opening against the body side outer panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the outer door weatherstrip for the 2000 GMC Jimmy? Posted by Customer
    A:
    Open the window and remove the outer door weatherstrip from the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the weatherstrip for the 2001 GMC Jimmy? Posted by Customer
    A:
    Push the weatherstrip onto the pinch weld flange, starting at the pre-formed corner and working around the entire edge of the door opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you check after the adhesive has dried for the 2004 GMC Sonoma? Posted by Customer
    A:
    Visually check the window and seal in both the full open and closed positions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after removing the old seal for the 2003 GMC Sonoma? Posted by Customer
    A:
    Position the new seal assembly to the hood and press it into place until it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after positioning the weatherstrip for the 2004 GMC Sonoma? Posted by Customer
    A:
    Firmly press the weatherstrip into place, ensuring it is seated properly around the entire perimeter.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the old weatherstrip for the 2000 GMC Jimmy? Posted by Customer
    A:
    Install the new rear side door weatherstrip by locating the butt joint at the bottom center of the window opening and setting the weatherstrip around the window opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Belt Weatherstrip, Front Outer Passenger Side 15011042 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15011042 Belt Weatherstrip, Front Outer Passenger Side is available in the market under the name GM Weather Strip. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15011042 Belt Weatherstrip, Front Outer Passenger Side fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15011042 maintains top performance when functioning as the Sealing Strip, Front Side Door Window Outer; Weatherstrip unit at its Front Outer Passenger Side. The component 15011042 is constructed from durable material and its dimensions span 42.2 x 3.1 x 3.3 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Sealing Strip, Side Door Window Glass. The part 15011042 has available replacement options 15647880, 15159762. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.