Make sure this part fits

GM 20829005
Position Sensor, Front Passenger Side

2004-2015 GM

Customer Questions & Expert Answers (13)
GM 20829005 Position Sensor, Front Passenger Side
GM 20829005 Position Sensor, Front Passenger Side
  • Part Description
    Sensor Assembly-Electronic Suspension Front Position; Ride Height Sensor
  • Position
    Front Passenger Side
  • Replaces
    88957144
  • Manufacturer
    General Motors
Make sure this part fits
$111.45 MSRP: $199.02
You Save: $87.57 (44%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2015 Cadillac CTSBase, Luxury, Performance, Premium, V, Vsport, Vsport Premium4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    2005-2011 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 20829005 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 20829005 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be disconnected after removing the tire and wheel for the 2005 Cadillac STS? Posted by Customer
    A:
    Disconnect the rear ride sensor link from the upper control arm ball stud and the rear ride sensor harness connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ride Height Sensor
    Q:
    What needs to be disconnected during the replacement process for the 2009 Cadillac CTS? Posted by Customer
    A:
    Disconnect the ride sensor link from the upper control arm ball stud and the ride sensor harness connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ride Height Sensor
    Q:
    What is the first step in the installation process of the new sensor for the 2008 Cadillac SRX? Posted by Customer
    A:
    Position the sensor in the vehicle, ensuring the captured stud bottoms out in the keyhole.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ride Height Sensor
    Q:
    What should be done to ensure the sensor bracket is properly seated for the 2004 Cadillac SRX? Posted by Customer
    A:
    Rotate the sensor and bracket until the tab on the bracket is fully seated in the slot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ride Height Sensor
    Q:
    How is the rear ride sensor removed for the 2009 Cadillac SRX? Posted by Customer
    A:
    Remove the rear ride sensor from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ride Height Sensor
    Q:
    What should be disconnected after removing the tire and wheel for the 2005 Cadillac SRX? Posted by Customer
    A:
    Disconnect the rear ride sensor link from the upper control arm ball stud and the rear ride sensor harness connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ride Height Sensor
    Q:
    What should you do if the sensor bracket is not level for the 2007 Cadillac STS? Posted by Customer
    A:
    Adjust it by allowing the captured stud to lift slightly from the keyhole until the sensor is level.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ride Height Sensor
    Q:
    What is the next step after removing the rear ride sensor for the 2006 Cadillac STS? Posted by Customer
    A:
    Position the new sensor in the vehicle, ensuring the captured stud bottoms out in the keyhole.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ride Height Sensor
    Q:
    What is the torque specification for the rear ride height sensor retaining nut for the 2005 Cadillac STS? Posted by Customer
    A:
    Tighten it to 9 Nm (80 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ride Height Sensor
    Q:
    What should be reconnected after installing the sensor for the 2007 Cadillac SRX? Posted by Customer
    A:
    Reconnect the ride sensor link to the upper control arm ball stud and the ride sensor harness connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ride Height Sensor
    Q:
    What is the first step to replace the Electronic Suspension Rear Position Sensor for the 2008 Cadillac STS? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ride Height Sensor
    Q:
    How do you loosen the connection to the fender for the 2009 Cadillac SRX? Posted by Customer
    A:
    Gently tap the front ride sensor retaining stud.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ride Height Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Position Sensor, Front Passenger Side 20829005 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 20829005 Position Sensor, Front Passenger Side is available in the market under the name GM Ride Height Sensor. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 20829005 Position Sensor, Front Passenger Side fits certain Cadillac CTS, SRX, STS models.
The original GM component designated by manufacturer part number 20829005 maintains top performance when functioning as the Sensor Assembly-Electronic Suspension Front Position; Ride Height Sensor unit at its Front Passenger Side. The component 20829005 is constructed from durable material and its dimensions span 7.8 x 5.8 x 5.7 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Front Sensor; Sensor, Air Suspension Leveling Or Level Control. The part 20829005 has available replacement options 88957144. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.