Make sure this part fits

GM 12609159
Oxygen Sensor

2006-2009 GM

Customer Questions & Expert Answers (10)
GM 12609159 Oxygen Sensor
  • Part Description
    Sensor Assembly-Heated Oxygen (Position 2)
  • Replaces
    12598300
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2009 Cadillac SRXBase8 Cyl 4.6 L GAS
    2006-2009 Cadillac STSV8 Cyl 4.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12609159 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12609159 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the installation process for the oxygen sensor for the 2007 Cadillac SRX? Posted by Customer
    A:
    Attach the oxygen sensor to the exhaust pipe, tightening it to 42 N.m (31 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oxygen Sensor
    Q:
    What is the first step to replace the Heated Oxygen Sensor (HO2S) for Bank 1 Sensor 1 for the 2008 Cadillac SRX? Posted by Customer
    A:
    Ensure the ignition is turned OFF.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oxygen Sensor
    Q:
    How should the HO2S be installed for the 2009 Cadillac STS? Posted by Customer
    A:
    Install the HO2S to the catalytic converter and tighten it to 40 Nm (30 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oxygen Sensor
    Q:
    What is the first step to replace the Heated Oxygen Sensor (HO2S) for Bank 2 Sensor 2 on the LC3 engine for the 2006 Cadillac STS? Posted by Customer
    A:
    First, remove the engine sight shield and the windshield wiper module assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oxygen Sensor
    Q:
    What should be done after removing the air inlet panel for the 2008 Cadillac SRX? Posted by Customer
    A:
    Disconnect the HO2S electrical connector and detach it from the wiring harness bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oxygen Sensor
    Q:
    What is the next step after disconnecting the HO2S electrical connector for the 2007 Cadillac STS? Posted by Customer
    A:
    Remove the HO2S.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oxygen Sensor
    Q:
    What is the next step after ensuring the engine is at the recommended temperature for the 2009 Cadillac SRX? Posted by Customer
    A:
    Remove the HO2S from the catalytic converter.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oxygen Sensor
    Q:
    What should be done after installing the HO2S for the 2008 Cadillac STS? Posted by Customer
    A:
    Reconnect the electrical connector and reinstall the wiring harness to the transmission case before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oxygen Sensor
    Q:
    What is the next step after disconnecting the oxygen sensor electrical connector for the 2006 Cadillac STS? Posted by Customer
    A:
    Raise and support the vehicle, then remove the oxygen sensor from the exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oxygen Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Oxygen Sensor 12609159 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12609159 Oxygen Sensor is available in the market under the name GM Oxygen Sensor. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12609159 Oxygen Sensor fits certain Cadillac SRX, STS models.
The original GM component designated by manufacturer part number 12609159 maintains top performance when functioning as the Sensor Assembly-Heated Oxygen (Position 2) unit. The component 12609159 is constructed from durable material and its dimensions span 8.2 x 3.2 x 3.1 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Rear Oxygen Sensor; Sensor, Computer Control Sensors. The part 12609159 has available replacement options 12598300. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.