Make sure this part fits

GM 10424946
Air Temperature Sensor

2001-2007 GM

Customer Questions & Expert Answers (14)
GM 10424946 Air Temperature Sensor
  • Part Description
    Sensor, Air Conditioner Electric Temperature And Motor Control
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    2001-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    2001-2004 Oldsmobile SilhouetteGL, GLS, Premiere6 Cyl 3.4 L GAS
    2001-2005 Pontiac AztekBase, GT, Rally6 Cyl 3.4 L GAS
    2001-2005 Pontiac MontanaBase6 Cyl 3.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10424946 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10424946 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the right headlamp assembly for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Disconnect the electrical connector from the ambient air temperature sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ambient Temperature Sensor
    Q:
    What is the installation process for the IAT sensor for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Snap the IAT sensor into place and then connect the IAT sensor electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold Temperature Sensor
    Q:
    What is the first step to replace the ambient air temperature gage sensor for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Open the hood and remove the clip from the hood latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ambient Temperature Sensor
    Q:
    What should you do after opening the hood for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Disconnect the electrical connector from the sensor and remove the sensor from the electrical harness clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ambient Temperature Sensor
    Q:
    How do you remove the IAT sensor from the air intake duct for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Carefully grasp the sensor and, using a twisting and pulling motion, remove the IAT sensor from the air intake duct.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold Temperature Sensor
    Q:
    What should you do after disconnecting the wiring harness retainer for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Remove the sensor from the wiring harness retainer and take it out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ambient Temperature Sensor
    Q:
    What is the first step to replace the Intake Air Temperature (IAT) Sensor for the 2004 Buick Rendezvous? Posted by Customer
    A:
    First, disconnect the electrical connector from the IAT sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold Temperature Sensor
    Q:
    What is the first step to replace the ambient outside air temperature sensor for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Turn the ignition OFF and open the hood.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ambient Temperature Sensor
    Q:
    What is the final step for installing the IAT sensor for the 2003 Chevrolet Venture? Posted by Customer
    A:
    Snap the IAT sensor into place and connect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold Temperature Sensor
    Q:
    What is the process for installing the new sensor for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Position the new outside ambient air temperature sensor in place and secure it with the radiator support bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ambient Temperature Sensor
    Q:
    What is the next step after disconnecting the electrical connector for the 2003 Chevrolet Venture? Posted by Customer
    A:
    Remove the bolt securing the sensor to the radiator support flange and take the sensor out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ambient Temperature Sensor
    Q:
    How do you remove the IAT sensor from the air intake duct for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Carefully grasp the sensor and remove it using a twisting and pulling motion.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold Temperature Sensor
    Q:
    How do you remove the IAT sensor from the air intake duct for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Carefully grasp the sensor and remove it using a twisting and pulling motion.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold Temperature Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Air Temperature Sensor 10424946 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10424946 Air Temperature Sensor is available in the market under the name GM Ambient Temperature Sensor, Intake Manifold Temperature Sensor, Air Charge Temperature Sensor. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10424946 Air Temperature Sensor fits certain Chevrolet Venture models, as well as Buick Rendezvous. Additionally, it is compatible with Pontiac Aztek, Montana and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 10424946 maintains top performance when functioning as the Sensor, Air Conditioner Electric Temperature And Motor Control unit. The component 10424946 is constructed from durable material and its dimensions span 6.1 x 6.2 x 1.0 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Refrigerant Temperature Sensor; Sensor, A/C Electric Temperature And Motor Control; Sensor, Computer Control Sensors. The part 10424946 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.