Make sure this part fits

GM 15547452
Speed Sensor

1989-2004 GM

Customer Questions & Expert Answers (17)
GM 15547452 Speed Sensor
  • Part Description
    Sensor, Vehicle Speed; ABS Sensor
  • Manufacturer
    General Motors
Make sure this part fits
$122.67 MSRP: $194.75
You Save: $72.08 (38%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1992-2004 Chevrolet BlazerBase, Cheyenne, LS, LT, Silverado, Silverado Sport, Trailblazer, ZR26 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1992-1999 Chevrolet C1500 SuburbanBase, LS, LT, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1992-1999 Chevrolet C2500 SuburbanBase, LS, LT, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1992-1999 Chevrolet K1500 SuburbanBase, LS, LT, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1992-1999 Chevrolet K2500 SuburbanBase, LS, LT, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1989-2004 Chevrolet S10Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    1989-1994 Chevrolet S10 BlazerBase, High Country, LT, Sport, Tahoe, Tahoe LT6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    1995-1996 Chevrolet TahoeBase, LS, LT8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1992-1999 GMC C1500 SuburbanBase, SLE, SLT8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1992-1999 GMC C2500 SuburbanBase, SLE, SLT8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15547452 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15547452 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after installing the O-ring on the vehicle speed sensor assembly for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Install the vehicle speed sensor assembly itself and tighten the bolt to 16 Nm (12 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What are the final steps after reattaching the WSS for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Reinstall the brake rotor for the 1500 series, put the tire and wheel back on, and perform the Diagnostic System Check - ABS (W/O JL4) or Diagnostic System Check - ABS (W/JL4).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Speed Sensor
    Q:
    What should be done after installing the new sensor for the 2002 Chevrolet S10? Posted by Customer
    A:
    Reconnect the electrical connector, reinstall the front propeller shaft, and the transfer case shield before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done to the new O-ring seal before installation for the 2003 Chevrolet S10? Posted by Customer
    A:
    Coat it with a thin film of transmission fluid.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the next step after tightening the bolt for the 2002 Chevrolet S10? Posted by Customer
    A:
    Reconnect the wiring harness electrical connector to the vehicle speed sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the final step after tightening the bolt for the 2003 Chevrolet S10? Posted by Customer
    A:
    Reconnect the wiring harness electrical connector to the vehicle speed sensor, remove the drain pan, lower the vehicle, and fill the transmission to the proper level with DEXRON (R) III transmission fluid.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What needs to be disconnected before removing the speed sensor for the 2004 Chevrolet S10? Posted by Customer
    A:
    The electrical connector from the transfer case speed sensor needs to be disconnected.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the torque specification for the sensor mounting screw for the 2002 Chevrolet S10? Posted by Customer
    A:
    Tighten the sensor mounting screw to 18 Nm (13 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Speed Sensor
    Q:
    What is the procedure for removing the sensor for the 2001 GMC Jimmy? Posted by Customer
    A:
    Remove the sensor itself after disconnecting the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be removed after disconnecting the electrical connector for the 2000 GMC Jimmy? Posted by Customer
    A:
    Next, remove the bolt, the vehicle speed sensor, and the O-ring seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the next step after removing the bolt for the 2000 GMC Jimmy? Posted by Customer
    A:
    Take out the vehicle speed sensor along with the O-ring seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should be done after inserting the sensor for the 2004 GMC Sonoma? Posted by Customer
    A:
    Install the bolt and tighten it to 11 Nm (97 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the installation process for the new speed sensor for the 2004 GMC Sonoma? Posted by Customer
    A:
    Ensure to install the transfer case left rear speed sensor back into the transfer case, tightening it to 15 Nm (11 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What should not be removed from the bearing assembly for the 2003 GMC Sonoma? Posted by Customer
    A:
    Do not attempt to remove the stainless steel shim, as it is permanently attached.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Speed Sensor
    Q:
    What needs to be removed along with the vehicle speed sensor for the 2003 GMC Sonoma? Posted by Customer
    A:
    The O-ring seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Vehicle Speed Sensor
    Q:
    What is the next step after detaching the clips for the 2001 GMC Jimmy? Posted by Customer
    A:
    Disconnect the wheel speed sensor electrical connector and remove the sensor mounting screw.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Speed Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Speed Sensor 15547452 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15547452 Speed Sensor is available in the market under the name GM Vehicle Speed Sensor, Wheel Speed Sensor. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15547452 Speed Sensor fits certain Chevrolet S10, Tahoe, Blazer models, as well as GMC Yukon, Sonoma, Typhoon. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15547452 maintains top performance when functioning as the Sensor, Vehicle Speed; ABS Sensor unit. The component 15547452 is constructed from durable material and its dimensions span 3.2 x 1.9 x 1.4 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Vehicle Speed Sensor; Emission Control (Oxygen) Sensor; Computer Control Sensors; Speedometer Drive Sensor. The part 15547452 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.