GM 22820716
Shackle, Rear

First, initiate the spring shackle replacement by raising and supporting the vehicle and then eliminating the leaf spring assembly. The spring needs its shackle bolt and nut to be taken out. Begin installation by linking the shackle to the spring according to the Fastener Notice in Cautions and Notices before fastening the shackle nut and bolt to the spring with a torque of 95 Nm (70 ft lbs.). After spring assembly installation restore the vehicle and remove safety stands followed by lowering it.

First, initiate the spring shackle replacement by raising and supporting the vehicle and then eliminating the leaf spring assembly. The spring needs its shackle bolt and nut to be taken out. Begin installation by linking the shackle to the spring according to the Fastener Notice in Cautions and Notices before fastening the shackle nut and bolt to the spring with a torque of 95 Nm (70 ft lbs.). After spring assembly installation restore the vehicle and remove safety stands followed by lowering it.

The first step for spring shackle replacement requires lifting the vehicle using proper equipment and supporting it. Take the leaf spring assembly out from the vehicle during the next step. Remove the bolt together with the shackle nut that secures the spring at this point. The first step is to secure the shackle to the spring as per the Fastener Notice in Service Precautions instructions. Fasten the shackle nut along with bolt onto the spring while applying 95 N.m (70 lb ft) torque to the shackle nut. The leaf spring assembly is then reattached to the vehicle after safety stands are removed and you can lower the vehicle.

Your first step to replace the spring shackle starts with vehicle raising and support. Start by lifting the vehicle and then taking out its leaf spring assembly. The spring shackle installation starts by removing its shackle nut along with bolt. The shackle installation requires mounting it onto the spring by following the Fastener Notice directions. Secure the spring shackles with the provided bolts and nuts by tightening them to 95 N.m (70 lb ft). Reinstalling the leaf spring assembly onto the vehicle should be followed by safety stand removal and vehicle lowering.

Vehicle elevation followed by support is the first step to replace the spring shackle. First you need to extract the leaf spring assembly from the vehicle platform. Start by removing the shackle nut as well as bolt that secure the spring. You should install the shackle on the spring while observing safe fastener practices. Use the shackle nut and bolt to attach them to the spring before tightening them to 95 Nm (70 lb ft). After reattaching the leaf spring assembly to the vehicle, remove the safety stands along with safely lowering the vehicle.

When replacing the spring shackle start by lifting and sustaining the vehicle in position. Start by lifting and supporting the vehicle, then take out the leaf spring assembly that is mounted on the vehicle. Proceed with removing the shackle nut and the bolt attached to the spring component. Install the shackle to the spring while following the Fastener Notice in Service Precautions. Fasten the bolt and shackle nut onto the spring before tightening the shackle nut to 95 Nm (70 ft finns). The leaf spring assembly should be reinstalled to the vehicle followed by removal of security stands when lowering the vehicle.

A mechanic should elevate and stabilize the vehicle before starting to replace the spring shackle. Drain the leaf spring assembly from the vehicle in the first step. First extract the bolt along with its attached shackle nut from the spring. When installing the shackle you should apply it to the spring while strictly following the Fastener Notice in Service Precautions. Fix the shackle bolt together with the shackle nut onto the spring before torquing the shackle nut to 95 Nm (70 ft. lbs.). The leaf spring assembly should be reinstalled to the vehicle followed by safety stand removal then lowering the vehicle.

The first step to replace the spring shackle begins with vehicle raising along with appropriate vehicle support. The first step involves taking out the leaf spring assembly from the vehicle and after that separating the shackle nut and bolt from the spring. Install the shackle on the spring by following the provided Fastener Notice. Attach the shackle nut and bolt to the spring afterward while tightening them to 95 Nm (70 ft. lbs.). Reinstall the leaf spring assembly to the vehicle before removing safety stands to lower the vehicle.

Begin repair by using proper vehicle supports to lift up your vehicle. Start by removing the leaf spring assembly from the vehicle then take out the shackle nut and bolt from the spring. Follow Fastener Notice in Service Precautions when attaching the shackle to the spring during installation. Tighten the shackle nut to 95 Nm (70 ft. lbs.) after positioning it and the bolt on the spring. Reinstall the leaf spring assembly into the vehicle then remove safety stands before lowering the vehicle.

The first step to install a new rear spring shackle on 1500 Series vehicles requires a vehicle lift for support. Take out the leaf spring assembly from the vehicle as the following step. You need to extract both bolt and nut from the spring after removing the leaf spring assembly from the vehicle. The installation process requires attaching the shackle to the spring with attention to all fastener safety guidelines. Fitting the spring with its shackle nut and bolt requires torquing the shackle nuts to 95 Nm (70 lb ft). Follow this by installing the leaf spring assembly onto the vehicle then take out the safety stands before lowering the vehicle.

First, initiate the spring shackle replacement by raising and supporting the vehicle and then eliminating the leaf spring assembly. The spring needs its shackle bolt and nut to be taken out. Begin installation by linking the shackle to the spring according to the Fastener Notice in Cautions and Notices before fastening the shackle nut and bolt to the spring with a torque of 95 Nm (70 ft lbs.). After spring assembly installation restore the vehicle and remove safety stands followed by lowering it.

The first step to replace the spring shackle begins with vehicle raising along with appropriate vehicle support. The first step involves taking out the leaf spring assembly from the vehicle and after that separating the shackle nut and bolt from the spring. Install the shackle on the spring by following the provided Fastener Notice. Attach the shackle nut and bolt to the spring afterward while tightening them to 95 Nm (70 ft. lbs.). Reinstall the leaf spring assembly to the vehicle before removing safety stands to lower the vehicle.

A mechanic should elevate and stabilize the vehicle before starting to replace the spring shackle. Drain the leaf spring assembly from the vehicle in the first step. First extract the bolt along with its attached shackle nut from the spring. When installing the shackle you should apply it to the spring while strictly following the Fastener Notice in Service Precautions. Fix the shackle bolt together with the shackle nut onto the spring before torquing the shackle nut to 95 Nm (70 ft. lbs.). The leaf spring assembly should be reinstalled to the vehicle followed by safety stand removal then lowering the vehicle.