Make sure this part fits

GM 88982525
Axle Shafts

2005-2010 GM

Customer Questions & Expert Answers (11)
GM 88982525 Axle Shafts
  • Part Description
    Shaft; Axle Shaft
  • Position
    Rear
  • Replaced By
    88982526
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number88982525
    Part DescriptionShaft; Axle Shaft
    PositionRear
    ConditionNew
    ManufacturerGeneral Motors
    SKU88982525
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2010 Chevrolet Express 2500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2005-2010 GMC Savana 2500Base, LS, LT, SLE6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
  • Customer Questions & Expert Answers

    Q:
    Is 88982525 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88982525 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step in the installation process for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Position the propeller shaft back into the transfer case if 4WD or the transmission if 2WD.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be removed after the tire and wheel assembly for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the brake caliper and the rear cover along with the gasket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How do you remove the propeller shaft for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the propeller shaft from the transfer case if 4WD or from the transmission if 2WD.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What is the first step to replace the two-piece propeller shaft for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    First, raise the vehicle and support the propeller shaft with safety stands.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should you do if the axle shaft is difficult to remove for the 2010 Chevrolet Express 2500? Posted by Customer
    A:
    Utilize the J 2619-01 (slide hammer) and J 45859 (remover/installer).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the next step after seating the rear axle shaft lock for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Pull the shaft flange outward to seat the rear axle shaft lock in the differential side gear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done after positioning the propeller shaft for the 2010 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the tape from the U-Joint and align the reference marks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    How do you disconnect the propeller shaft from the rear axle pinion yoke for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Remove the bolts and yoke retainers from the rear axle pinion yoke and disconnect the propeller shaft from the rear axle pinion yoke.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What must be ensured during the installation regarding the U-Joint for the 2007 GMC Savana 2500? Posted by Customer
    A:
    The alignment marks on the U-Joint and the yoke must be properly aligned.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What is the torque specification for the axle flange bolts for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Tighten them to 156 Nm (115 lb ft) for the 10.5 inch axle or 185 Nm (136 lb ft) for the 11.5 inch axle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 88982525, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 88982525 Axle Shafts. It is sometimes referred to as GM Axle Shaft, GM Drive Shaft. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 88982525 Axle Shafts. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery