Make sure this part fits

GM 25813597
Heat Shield, Passenger Side

1997-2013 GM

Customer Questions & Expert Answers (14)
GM 25813597 Heat Shield, Passenger Side
GM 25813597 Heat Shield, Passenger Side
  • Part Description
    Shield, Catalytic Converter; Exhaust Heat Shield
  • Position
    Passenger Side
  • Replaces
    10259598
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac XLRBase, Platinum, V8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    1997-2013 Chevrolet Corvette427, 427 Limited Edition Z06, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Grand Sport, Indianapolis 500 Pace Car, Z06, Z06 Carbon, ZR18 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25813597 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25813597 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the exhaust heat shield on Chevrolet Corvette? Posted by Customer
    A:
    The first step for replacing the Exhaust Heat Shield involves lifting and securing a vehicle. Begin by taking off first the intermediate pipe assembly while proceeding to eliminate both bolts and panel from the closeout section. The removal of the heat shield needs heat shield rivets to be drilled out. The installation process begins by putting new heat shield rivets to secure the heat shield before its attachment. Attaching the closeout panel requires following the fastener notice in service precautions while you should fasten closeout panel bolts to 12 nm (106 inch lbs). The installation process ends with the intermediate pipe reassembly followed by lowering the vehicle down.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step after installing the new exhaust heat shield for the 2004 Cadillac XLR? Posted by Customer
    A:
    Reinstall the intermediate pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the Exhaust Muffler Heat Shield for the 2005 Cadillac XLR? Posted by Customer
    A:
    First, remove the left and right muffler.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How do you secure the new exhaust heat shield for the 2007 Cadillac XLR? Posted by Customer
    A:
    Secure it with new exhaust heat shield rivets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done after removing the intermediate pipe for the 2009 Cadillac XLR? Posted by Customer
    A:
    Drill out the exhaust heat shield rivets and then remove the exhaust heat shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the Exhaust Muffler Heat Shield for the 2009 Cadillac XLR? Posted by Customer
    A:
    First, remove the left and right muffler.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done after removing the muffler for the 2006 Chevrolet Corvette? Posted by Customer
    A:
    Drill out the left or right muffler heat shield rivets and remove the left or right heat shield washers along with the shield itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the catalytic converter heat shield for the 2008 Chevrolet Corvette? Posted by Customer
    A:
    First, remove the catalytic converters using the appropriate procedures for the left and right sides based on the engine specifications (6.0L, 6.2L, 7.0L).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step after installing the new heat shield for the 2003 Chevrolet Corvette? Posted by Customer
    A:
    Reinstall the catalytic converter.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What comes after installing the heat shield and washers for the 2005 Chevrolet Corvette? Posted by Customer
    A:
    Followed by new left or right heat shield rivets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the exhaust muffler heat shield for the 2001 Chevrolet Corvette? Posted by Customer
    A:
    First, remove the left or right muffler.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How do you install the new catalytic converter heat shield for the 2010 Chevrolet Corvette? Posted by Customer
    A:
    Position the new catalytic converter heat shield and secure it with new rivets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step after installing the new heat shield for the 2007 Chevrolet Corvette? Posted by Customer
    A:
    Reinstall the muffler.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Heat Shield, Passenger Side 25813597 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25813597 Heat Shield, Passenger Side is available in the market under the name GM Exhaust Heat Shield. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25813597 Heat Shield, Passenger Side fits certain Chevrolet Corvette models, as well as Cadillac XLR models.
The original GM component designated by manufacturer part number 25813597 maintains top performance when functioning as the Shield, Catalytic Converter; Exhaust Heat Shield unit at its Passenger Side. The component 25813597 is constructed from durable material and its dimensions span 27.1 x 6.8 x 6.8 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Converter Shield. The part 25813597 has available replacement options 10259598. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.