Make sure this part fits

GM 15893982
Front Shield, Driver Side

2003-2009 GM

Customer Questions & Expert Answers (12)
GM 15893982 Front Shield, Driver Side
  • Part Description
    Shield-Exhaust Heat; Exhaust Heat Shield
  • Position
    Driver Side
  • Replaces
    15170403
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2005 Buick RainierCXL, CXL Plus8 Cyl 5.3 L GAS
    2006-2009 Chevrolet TrailblazerBase, LS, LT, SS8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Chevrolet Trailblazer EXTLS, LT, North Face8 Cyl 5.3 L GAS
    2005-2009 GMC EnvoyDenali8 Cyl 5.3 L GAS
    2003-2006 GMC Envoy XLDenali, SLE, SLT8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15893982 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15893982 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after installing the heat shield for the 2004 Buick Rainier? Posted by Customer
    A:
    Reinstall the oxygen sensor and the oil level indicator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step after installing the heat shield for the 2005 Buick Rainier? Posted by Customer
    A:
    Finally, lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How should the nuts securing the heat shield be installed for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Install the two nuts securing the heat shield to the underbody and tighten them to 7 Nm (62 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How do you install the new exhaust pipe heat shield for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Position the exhaust pipe heat shield back onto the frame, ensuring to follow the fastener notice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How do you secure the heat shield for the 2007 GMC Envoy? Posted by Customer
    A:
    Secure the heat shield with the 5 bolts, tightening them to 7 N.m (62 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How should the new heat shield and bolts be installed for the 2006 Chevrolet Trailblazer? Posted by Customer
    A:
    Install the heat shield and the bolts to the exhaust manifold, tightening the bolts to 9 Nm (80 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the next step after detaching the oxygen sensor for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the 4 manifold heat shield nuts and take off the heat shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be removed after raising for the 2006 GMC Envoy? Posted by Customer
    A:
    Remove the catalytic converter heat shield's rear 2 bolts that connect it to the muffler heat shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step after installation for the 2005 GMC Envoy? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the exhaust muffler heat shield for the 2009 GMC Envoy? Posted by Customer
    A:
    First, remove the catalytic converter heat shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should you do if there is an additional heat shield for the 2008 GMC Envoy? Posted by Customer
    A:
    If equipped, remove the two nuts securing the additional heat shield to the underbody and then remove that heat shield as well.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Front Shield, Driver Side 15893982 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15893982 Front Shield, Driver Side is available in the market under the name GM Exhaust Heat Shield. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15893982 Front Shield, Driver Side fits certain Chevrolet Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier models.
The original GM component designated by manufacturer part number 15893982 maintains top performance when functioning as the Shield-Exhaust Heat; Exhaust Heat Shield unit at its Driver Side. The component 15893982 is constructed from durable material and its dimensions span 24.5 x 10.3 x 5.2 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Center Shield; Shield, Exhaust Manifold. The part 15893982 has available replacement options 15170403. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.