Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15907033
Fan Shroud

2006-2008 GM

Customer Questions & Expert Answers (4)
GM 15907033 Fan Shroud
  • Part Description
    Shroud, Dual Radiator and Condenser Fan Assembly; Cooling Fan Assembly; Fan Motor
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 15907033 Fan Shroud is Ref No. 13 in the diagram below

    2008 Chevy Uplander Fan Shroud Diagram for 15907033
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15907033

  • Vehicle Fitment

    Year Make Model Trim Engine
    2007 Buick TerrazaCX, CXL6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2006-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2007 Saturn Relay1, 2, 36 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15907033 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15907033 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the cooling fan and fan shroud (LZ9) on Chevrolet Uplander? Posted by Customer
    A:
    Removal of the air cleaner and duct assembly should be the first step when handling a cooling fan replacement project including a shroud replacement (LZ9). The first step involves removing the right side diagonal brace followed by taking off the radiator inlet hose. Start by disconnecting the cooling fan harness electrical connector then soften the engine mount strut nuts situated at the engine side. Start by disconnecting the radiator outlet hose in its retainer and extract the overflow hose from its retainers and rotate engine mount strut bracket bolts from the upper radiator support for removal. The procedure begins by removing the battery while performing radiator upper mount bolting then extracting both radiator upper mounts and cooling Fan Shroud bolts. First disconnect the upper transmission oil cooler line from the radiator then elevate the vehicle to take out the radiator air baffle. Disconnect the toc lines from the Fan Shroud retainer clip afterward lower the vehicle and finally remove both cooling Fan Shroud and fans. Begin installation by setting the cooling Fan Shroud along with fans in position before raising the vehicle to attach toc lines with the Fan Shroud retainer clip followed by radiator air baffle installation. Lower the vehicle then join the upper toc line with the radiator. Begin installation by fastening the cooling Fan Shroud bolts to 6 n.m (53 lb in). Then move to the radiator upper mounts and upper mount bolts that need to be tightened to 10 n.m (88 lb in). The battery installation should be followed by attaching the radiator outlet hose retainer and affixing the overflow hose to its retainers. The first step involves lining up engine mount struts brackets against the upper radiator support before installing engine mount strut bracket brace bolts to this surface until they reach 28 n.m (21 lb ft) and tightening engine strut mount nuts at the engine side to 48 n.m (35 lb ft). The cooling fan harness electrical connector needs reconnection after installing the radiator inlet hose and right side diagonal brace and air cleaner and duct assembly.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done with the engine mount struts brackets for the 2007 Buick Terraza? Posted by Customer
    A:
    Position them flush with the upper radiator support.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fan Shroud
    Q:
    What should be done with the coolant overflow hose clamp for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    Reposition it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fan Shroud
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Fan Shroud 15907033 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15907033 Fan Shroud is available in the market under the name GM Fan Shroud. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15907033 Fan Shroud fits certain Chevrolet Uplander models, as well as Buick Terraza. Additionally, it is compatible with Saturn Relay models.
The original GM component designated by manufacturer part number 15907033 maintains top performance when functioning as the Shroud, Dual Radiator and Condenser Fan Assembly; Cooling Fan Assembly; Fan Motor unit. The component 15907033 is constructed from durable material and its dimensions span 42.7 x 29.0 x 6.4 inches while weighing 4.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Fan Assembly; Shroud Assembly. The part 15907033 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.