Make sure this part fits

GM 13575701
Solenoid Valve, Green Line

2004-2012 GM

Customer Questions & Expert Answers (6)
GM 13575701 Solenoid Valve, Green Line
GM 13575701 Solenoid Valve, Green Line
  • Part Description
    Solenoid, Evaporator Emission Canister; Vapor Canister Vent Solenoid
  • Replaces
    10382104, 25932570
  • Manufacturer
    General Motors
Make sure this part fits
$32.34 MSRP: $60.74
You Save: $28.40 (47%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number13575701
    Part DescriptionSolenoid, Evaporator Emission Canister; Vapor Canister Vent Solenoid
    Other NamesVent Control Solenoid; Solenoid; Solenoid, Fuel Tank Evaporator/Purge Control
    Item Dimensions6.2 x 4.0 x 4.2 inches
    Item Weight0.70 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces10382104, 25932570
    ManufacturerGeneral Motors
    SKU13575701
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet MalibuHybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
    2008-2009 Saturn AstraXE, XR4 Cyl 1.8 L GAS
    2007-2009 Saturn AuraGreen Line, Hybrid, XE, XR4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 13575701 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 13575701 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the canister purge valves on Chevrolet Malibu? Posted by Customer
    A:
    Start replacement of the evaporative emission canister purge solenoid valve by removing the air cleaner outlet duct. Begin by removing the generator battery control module cover when needed. The procedure starts with discarding the engine wiring harness connector from the evap canister purge solenoid valve then moving to the disconnect process of both quick connect fittings from chassis and engine evap lines. Begin by unbolt first the evap canister purge valve bracket bolt then remove its bracket before splitting the valve free from the bracket. Check the evap canister purge valve ports to confirm no carbon leaks occur. Replace the evap canister along with its necessary components when loose carbon is detected in order to eliminate carbon particles. Follow these steps for installation: position the evap canister purge valve with its bracket to the Cylinder Head before tightening the bracket bolt to 25 nm (18 lb ft). Connect the engine evap quick connect fitting to the solenoid valve first and then proceed with the chassis evap quick connect fitting attachment. First reconnect the solenoid valve's wiring harness electrical connector from the engine harness and reinstall the generator battery control module cover (if needed) before installing the air cleaner outlet duct.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after disconnecting the pipes for the 2004 Chevrolet Malibu? Posted by Customer
    A:
    Remove the EVAP canister purge valve and bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Canister Purge Valves
    Q:
    What are the final steps to complete the process for the 2005 Chevrolet Malibu? Posted by Customer
    A:
    Reconnect the EVAP canister purge pipe to the valve and attach the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Canister Purge Valves
    Q:
    What is the next step after positioning the assembly to the cylinder head for the 2008 Chevrolet Malibu? Posted by Customer
    A:
    Install the EVAP canister purge solenoid valve bracket bolt, tightening it to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Canister Purge Valves
    Q:
    What is the first step to replace the EVAP canister purge solenoid valve for the 2006 Chevrolet Malibu? Posted by Customer
    A:
    Disconnect the evaporative emission canister purge valve harness connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Canister Purge Valves
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 13575701, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 13575701 Solenoid Valve, Green Line. It is sometimes referred to as GM Canister Purge Valves. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 13575701 Solenoid Valve, Green Line. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery