Other Name: Solenoid Assembly-Evaporator Emission Canister; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Control Valve; Shut-Off Valve; Fuel Tank Vent; Vapor Valve; Vent Control Solenoid; Fuel Tank Evaporator/Purge Control
Replaces: 10293954, 10337458, 20761332
Fits the following Chevrolet Models:
Camaro | 1999-2002 | Base, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
Corvette | 2000-2013 | 427, 427 Limited Edition Z06, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
Impala | 2000-2001 | Base, LS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
Monte Carlo | 2000 | LS, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
Other Name: Solenoid, Evaporator Emission Canister; Vapor Canister Vent Solenoid; Vent Control Solenoid; Solenoid; Solenoid, Fuel Tank Evaporator/Purge Control
Replaces: 10382104, 25932570
Fits the following Chevrolet Models:
Malibu | 2004-2012 | Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
Other Name: Solenoid Assembly-Evaporator Emission Canister; Vapor Canister Vent Solenoid; Vent Control Solenoid; Solenoid, Fuel Tank Evaporator/Purge Control
Replaces: 22783575, 20981698
Fits the following Chevrolet Models:
Silverado 2500 HD | 2011-2016 | High Country, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
Silverado 3500 HD | 2011-2016 | High Country, LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
Suburban 3500 HD | 2016 | LS, LT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
Other Name: Solenoid Assembly-Evaporator Emission Canister; Vapor Canister Vent Solenoid; Vent Control Solenoid; Solenoid, Fuel Tank Evaporator/Purge Control
Fits the following Chevrolet Models:
Silverado 2500 HD | 2017-2019 | High Country, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
Silverado 3500 HD | 2017-2019 | High Country, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
Other Name: Solenoid Assembly-Evaporator Emission Canister; Vapor Canister Vent Solenoid; Vent Control Solenoid; Solenoid, Fuel Tank Evaporator/Purge Control
Fits the following Chevrolet Models:
Silverado 2500 HD | 2020-2023 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
Silverado 3500 HD | 2020-2023 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
Q: How to replace the canister purge valves on Chevrolet Colorado?
A: The first step to change the Evaporative Emission Canister Purge Solenoid Valve involves elevating the vehicle to an accessible level through the wheelhouse so technicians can access the solenoid valve. Use the Plastic Collar Quick Connect Fitting Service to disconnect the EVAP purge hose/pipe and the EVAP purge hose from the EVAP canister purge solenoid valve. Lastly, disconnect the electrical connector from the solenoid valve. To extract the valve remove the bolt that secures the EVAP canister purge solenoid valve to the engine block. When installing the EVAP canister purge solenoid valve position it on the engine then bolt it down using 10 N.m (89 lb in) torque. Using the Plastic Collar Quick Connect Fitting Service, set up the EVAP purge hose/pipe connection to the valve then install the electrical connector on the solenoid valve. Install the left wheelhouse liner and lower the whole vehicle at the end of the process.
Q: How to Service and Repair Canister Purge Valves on Chevrolet Equinox?
A: To replace the evaporative emission (EVAP) canister purge solenoid valve, one has to turn off the ignition first. Remove the electrical connector from the evap canister purge solenoid valve and then remove the hose/pipe. Remove the retaining bolt and, take out the evap canister purge solenoid valve , from the Intake Manifold. For the intact operation, locate the evap canister purge solenoid valve on the Intake Manifold and secur e the retaing bolt with a torque of 10 n.m (89 lb in) (Fastener Notice in Service Precautions). Next, reattach the hose/pipe and the electric connection to the evap canister purge solenoid valve.
Q: How to replace the canister purge valves on Chevrolet Malibu?
A: The first step to replace the evap canister purge solenoid valve involves severing the connections between its harness connector and both vacuum pipe and purge pipe. Begin by removing the evap canister purge valve together with its bracket before finally taking off the valve from the purge bracket. A thorough examination of valve ports is needed to check for loose carbon deposits; evap canister replacement will be necessary if carbon particles exist because they must be eliminated. Install the evap canister purge valve by placing it on the purge bracket before attaching the valve and bracket while sealing the purge bracket nut to 8 n.m (71 lb in). The final step includes connecting the purge pipe along with the vacuum pipe to the evap canister purge valve and then restoring the harness connector into place.