To replace the Evaporative Emission Canister Purge Solenoid Valve, start with the removal of the intake manifold cover. Then, remove EVAP canister purge solenoid electrical connector and the chassis EVAP pipe from the EVAP canister purge solenoid Remove the EVAP canister purge valve bolt, and after that, the EVAP canister purge valve. In installation, place the EVAP canister purge valve upright and follow the Fastener Notice before securing it with the EVAP canister purge valve bolt and tightening it to 16 N.m (12 lb ft). Secure the chassis EVAP pipe to the EVAP canister purge solenoid and connect the EVAP canister purge solenoid electrical connector . Finally, reinstall the intake manifold cover.