Make sure this part fits

GM 15176760
Rear Driver Speaker, Driver Side

1995-2005 GM

Customer Questions & Expert Answers (13)
GM 15176760 Rear Driver Speaker, Driver Side
GM 15176760 Rear Driver Speaker, Driver Side
  • Part Description
    Speaker, Radio Auxiliary Speakers
  • Position
    Driver Side
  • Replaces
    16164465
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    2001-2004 Chevrolet S10Base, LS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1995-2001 GMC JimmyBase, Diamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    2001-2004 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1996-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15176760 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15176760 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to remove and install the rear car speakers on Chevrolet S10? Posted by Customer
    A:
    The removal of the rear speaker starts by removing the rear body side trim panel followed by disconnecting the electrical connectors. After disconnecting electrical connectors you should remove radio rear speaker nuts from the trim panel before taking out the rear speaker. The installation process requires a step-by-step approach starting with attaching the radio rear speaker onto the rear body side trim panel according to the Fastener Notice in Service Precautions. Screw the radio rear speaker nuts at 1.2 N.m (11 lb in) torque using a torque wrench because after you complete the reconnection of electrical connectors you will reinstall the rear body side trim panel. Conclude the inspection by checking circuit functionality.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the replacement process for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Reinstall the radio front speaker grille and its screws, again tightening to 1.9 N.m (17 lb in), and inspect for proper circuit operation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step to replace the rear (utility) speaker for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Remove the rear body side trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What should be done after removing the retaining rivets for the 2002 Chevrolet S10? Posted by Customer
    A:
    Remove the radio rear side door speaker and disconnect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the final step after installing the speaker and rivets for the 2003 Chevrolet S10? Posted by Customer
    A:
    Reinstall the door trim panel while inspecting for proper circuit operation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    How do you remove the front speaker for the 2002 Chevrolet S10? Posted by Customer
    A:
    First, take out the front speaker grille screws and then remove the radio front speaker grille.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step in the installation process for the 2004 Chevrolet S10? Posted by Customer
    A:
    Connect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step in the installation process for the 2000 GMC Jimmy? Posted by Customer
    A:
    Connect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the next step after removing the radio front speaker grille for the 2001 GMC Jimmy? Posted by Customer
    A:
    Remove the radio front speaker screws and the radio front speaker itself, followed by disconnecting the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What should be done if the DRL sensor is equipped for the 2000 GMC Jimmy? Posted by Customer
    A:
    Take out the DRL sensor from the right speaker grille by turning it counter-clockwise 1/4 turn.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    How do you reinstall the DRL sensor for the 2003 GMC Sonoma? Posted by Customer
    A:
    If applicable, reinstall the DRL sensor by turning it counterclockwise 1/4 turn into the right speaker grille.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the next step after installing the rear speaker for the 2003 GMC Sonoma? Posted by Customer
    A:
    Reconnect the electrical connectors and reinstall the rear body side trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Rear Driver Speaker, Driver Side 15176760 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15176760 Rear Driver Speaker, Driver Side is available in the market under the name GM Car Speakers. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15176760 Rear Driver Speaker, Driver Side fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15176760 maintains top performance when functioning as the Speaker, Radio Auxiliary Speakers unit at its Driver Side. The component 15176760 is constructed from durable material and its dimensions span 12.8 x 9.8 x 5.6 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 15176760 has available replacement options 16164465. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.