Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 12377494
Control Switch, Driver Side

1998-2003 GM

Customer Questions & Expert Answers (4)
GM 12377494 Control Switch, Driver Side
GM 12377494 Control Switch, Driver Side
GM 12377494 Control Switch, Driver Side
GM 12377494 Control Switch, Driver Side
GM 12377494 Control Switch, Driver Side
  • Part Description
    Switch Assembly, Driver Seat Lumbar Control
  • Position
    Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • Vehicle Fitment

    Year Make Model Trim Engine
    1998-2003 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1998-2003 Chevrolet S10Base, LS, SS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1998-2001 GMC JimmyDiamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1998-2003 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 12377494 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12377494 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the power seat switch on Chevrolet S10? Posted by Customer
    A:
    Before changing the power seat switch, take the seat out of the car. After that, unscrew the 3 fasteners that hold the trim panel to the seat and take out the electrical connection from the switch. The switch can be removed by pulling it off the plastic tabs and then unscrewing the assembly. Once done, slide the assembly into the trim panel, using the plastic clips as supports and plug the wire into the correct slot on the back of the switch. Place the 3 screws in the trim panel and secure it to the seat. Afterward, install the seat into your car.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to perform a Seat Switch replacement for the lumbar on GMC Jimmy? Posted by Customer
    A:
    The first task involves detaching the vehicle seat from its position before starting the replacement of the lumbar switch. First disconnect the electrical connector from the switch then remove the trim panel securing screws before taking out the 3 screws. A snap motion of the switch disconnects it from the plastic retaining clips before the switch assembly is removed from the trim panel. Reinstall the seat in the vehicle after installing the trim panel using its 3 screws and connecting the electrical connector to the switch and placing the switch assembly into the plastic retaining clips of the trim panel.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the power seat switch on GMC Sonoma? Posted by Customer
    A:
    The first step for replacing the power seat switch requires pulling out the seat from its vehicle position. First remove the trim panel screws which secure the seat then unplug the electrical connector from the switch. The switch can be extracted from the trim panel through snapping out of its plastic retaining tabs before removing the switch assembly. To complete the installation apply the switch assembly into the trim panel by using plastic retaining clips before reconnecting the electrical connector to the switch. To complete the installation you should tighten the trim panel walls with 3 screws after inserting the seat back into its original position inside the vehicle.
    Posted by ChevyPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Control Switch, Driver Side 12377494 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12377494 Control Switch, Driver Side is available in the market under the name GM Seat Switch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12377494 Control Switch, Driver Side fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy models.
The original GM component designated by manufacturer part number 12377494 maintains top performance when functioning as the Switch Assembly, Driver Seat Lumbar Control unit at its Driver Side. The component 12377494 is constructed from durable material and its dimensions span 6.0 x 4.4 x 1.8 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Switch, Seat Adjuster/Recliner. The part 12377494 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.