Make sure this part fits

GM 55352002
Water Pump

1997-2005 GM

Customer Questions & Expert Answers (7)
GM 55352002 Water Pump
GM 55352002 Water Pump
  • Part Description
    Pump, Water
  • Replaces
    09201182, 90543277, 93170697, 88894297, 9201182
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number55352002
    Part DescriptionPump, Water
    Other NamesWater Pump Assembly; Pump Kit, Engine Coolant; Pump, Engine Coolant
    Item Dimensions8.1 x 6.1 x 6.3 inches
    Item Weight2.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces09201182, 90543277, 93170697, 88894297, 9201182
    ManufacturerGeneral Motors
    SKU55352002
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2004 Cadillac CTSBase, Luxury, Luxury Sport6 Cyl 3.2 L GAS
    1997-2001 Cadillac CateraBase, Sport6 Cyl 3.0 L GAS
    2001-2005 Saturn L3002, 3, Base6 Cyl 3.0 L GAS
    2000 Saturn LS2Base6 Cyl 3.0 L GAS
    2000 Saturn LW2Base6 Cyl 3.0 L GAS
    2001-2003 Saturn LW300Base6 Cyl 3.0 L GAS
    2002-2003 Saturn VueBase6 Cyl 3.0 L GAS
  • Customer Questions & Expert Answers

    Q:
    Hi! Is this 55352002 a perfect fit for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 55352002 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace a water pump on Cadillac Catera? Posted by Customer
    A:
    Start by turning off the battery power and letting the coolant drain out. Detach the intake air resonator so you can ease up the Water Pump Pulley bolts at their position. Unfasten the front timing belt cover before you unscrew the Water Pump Pulley bolts directly followed by removing the Water Pump Pulley itself. Put the new Water Pump in place by taking out its bolts while holding the coolant in a catch basin. Scrub the engine's sealing spots before smearing silicone grease (GM P/N 12345579 or like product) on the replacement Water Pump's seal area. Fit the new Water Pump into position and fasten its bolts to 25 nm (18 ft. Pounds) torque. Mount the Water Pump Pulley on top of the front timing belt cover while inserting the intake air resonator. After reconnecting the ground cable connect and top up the cooling fluid.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace a water pump on Cadillac CTS? Posted by Customer
    A:
    However, you need to drain the cooling system and remove the timing belt cover in order to change the water pump. Next, it is recommended to undo the water pump bolts (using catch basin to collect the escaping coolant), and extract the water pump and seal extracting it; be warned not to reuse the seal. If the cover seal of the pump on the rad seal is leaking, then it should not leak; otherwise, it will necessitate a new pump. Must remember to inspect the mating surfaces of the water pump. Coat the seal ring of the water pump with silicone grease, GM P/N 12345579 (Canadian P/N 1974984), or equivalent, and make sure the O-ring seal is seated properly before installing on the water pump. Then, secure the water pump into the engine block (make sure that you proceed according to the fastener notice guidelines). Tighten water pump bolts to 25 Nm (18 ft. lbs.) and tighten the timing belt cover. Finally, fill the cooling system.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the water pump pulley for the 2001 Cadillac Catera? Posted by Customer
    A:
    Take off the front timing belt cover and remove the water pump bolts to extract the water pump.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What is the final step in the process for the 2000 Cadillac Catera? Posted by Customer
    A:
    Fill the cooling system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    What is the next step after preparing the seal ring for the 2004 Cadillac CTS? Posted by Customer
    A:
    Install the water pump into the engine block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    Q:
    How do you install the new afterboil coolant pump for the 2004 Cadillac CTS? Posted by Customer
    A:
    Position the afterboil coolant pump and install the afterboil coolant pump bolts, tightening them to 10 Nm (89 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 55352002, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 55352002 Water Pump. It is sometimes referred to as GM Water Pump. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 55352002 Water Pump. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery