Make sure this part fits

GM 15735055
Lower Weatherstrip

1994-2005 GM

Customer Questions & Expert Answers (15)
GM 15735055 Lower Weatherstrip
GM 15735055 Lower Weatherstrip
  • Part Description
    Weatherstrip, Side Door Opening; Door Seal
  • Position
    Front Lower
  • Replaces
    15672311
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1994-2004 Chevrolet S10Base, LS, SS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1995-2001 GMC JimmyBase, Diamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1994-2004 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1996-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15735055 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15735055 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    Where do you begin installing the drip channel for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Start at the upper rear corner of the front side door opening frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new door opening weatherstrip for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Position the pre-formed corner in the upper rear corner of the door opening and push the weatherstrip onto the pinch weld flange, starting at the pre-formed corner and working around the entire edge of the door opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you detach the weatherstrip from the sunroof window for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Gently pull the weatherstrip away from the sunroof window at one point and continue around the perimeter to detach it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new weatherstrip for the 2002 Chevrolet S10? Posted by Customer
    A:
    Open the liftgate window and push the new weatherstrip onto the pinch-weld flange, starting with the pre-formed corner at either upper corner of the liftgate window opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the old weatherstrip for the 2002 Chevrolet S10? Posted by Customer
    A:
    Take the new weatherstrip and remove the adhesive backing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear hood weatherstrip seal for the 2004 Chevrolet S10? Posted by Customer
    A:
    Remove the screws securing the seal to the cowl.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step in replacing the front door auxiliary weatherstrip for the 2002 Chevrolet S10? Posted by Customer
    A:
    The first step is to remove the existing weatherstrip from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after reinstalling the sunroof window for the 2003 Chevrolet S10? Posted by Customer
    A:
    Fully close it and allow the silicone to dry for 4-6 hours.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the door opening weatherstrip for the 2001 GMC Jimmy? Posted by Customer
    A:
    Gently pull it from the pinch weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you start replacing the rear side door window weatherstrip for the 2000 GMC Jimmy? Posted by Customer
    A:
    First, open the rear side door window and remove the weatherstrip by starting at the butt joint and pulling it from the window opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Should the inner sealing strip be removed during this process for the 2000 GMC Jimmy? Posted by Customer
    A:
    No, do not remove the inner sealing strip as it is stapled to the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after removing the front seal for the 2004 GMC Sonoma? Posted by Customer
    A:
    Position the sunroof in the vent position and finish removing the seal from the rear of the mainframe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after removing the old seal for the 2003 GMC Sonoma? Posted by Customer
    A:
    Position the new seal assembly to the hood and press it into place until it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the weatherstrip for the 2004 GMC Sonoma? Posted by Customer
    A:
    Reinstall the sunroof window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lower Weatherstrip 15735055 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15735055 Lower Weatherstrip is available in the market under the name GM Weather Strip, Door Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15735055 Lower Weatherstrip fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15735055 maintains top performance when functioning as the Weatherstrip, Side Door Opening; Door Seal unit at its Front Lower. The component 15735055 is constructed from durable material and its dimensions span 35.7 x 3.6 x 0.7 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Weatherstrip. The part 15735055 has available replacement options 15672311. Each vehicle needs 2 units of the part marked as SKU 15735055. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.