Make sure this part fits

GM 15766924
Window Channel, Front Passenger Side

1994-2005 GM

Customer Questions & Expert Answers (15)
GM 15766924 Window Channel, Front Passenger Side
GM 15766924 Window Channel, Front Passenger Side
  • Part Description
    Weatherstrip Assembly-Front Side Door Window *Marked Print
  • Position
    Front Passenger Side
  • Replaces
    15734150
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1994-2004 Chevrolet S10Base, LS, SS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1995-2001 GMC JimmyBase, Diamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1994-2004 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1996-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15766924 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15766924 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step after installing the weatherstrip for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Reinstall the sunroof window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you break the adhesive bond of the old seal for the 2004 Chevrolet S10? Posted by Customer
    A:
    Carefully break the adhesive bond using a flat-bladed tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the weatherstrip be installed after positioning it for the 2002 Chevrolet S10? Posted by Customer
    A:
    Install the strip forward along the roof flange and down the windshield revel molding flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after the silicone has dried for the 2003 Chevrolet S10? Posted by Customer
    A:
    Visually inspect the window and seal in both the full open and closed positions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What tool is used to remove the existing weatherstrip for the 2002 Chevrolet S10? Posted by Customer
    A:
    The Door Trim Pad Clip Remover (J 38778) is used.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new door opening weatherstrip for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Position the pre-formed corner in the upper rear corner of the door opening and push the weatherstrip onto the pinch weld flange, starting at the pre-formed corner and working around the entire edge of the door opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the front door weatherstrip (Drip Channel) for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Open the door and remove the weatherstrip drip channel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you ensure while installing the new weatherstrip for the 2002 Chevrolet S10? Posted by Customer
    A:
    Ensure that the weatherstrip is completely seated around the liftgate window opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the old weatherstrip for the 2000 GMC Jimmy? Posted by Customer
    A:
    Install the new rear side door weatherstrip by locating the butt joint at the bottom center of the window opening and setting the weatherstrip around the window opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Should the inner sealing strip be removed during this process for the 2000 GMC Jimmy? Posted by Customer
    A:
    No, do not remove the inner sealing strip as it is stapled to the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the door opening weatherstrip for the 2001 GMC Jimmy? Posted by Customer
    A:
    Gently pull it from the pinch weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the weatherstrip for the 2004 GMC Sonoma? Posted by Customer
    A:
    Reinstall the sunroof window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Why is it important to remove the sunroof window for the 2004 GMC Sonoma? Posted by Customer
    A:
    The sunroof window must be removed to clean the entire frame track of silicone adhesive.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after removing the old seal for the 2003 GMC Sonoma? Posted by Customer
    A:
    Position the new seal assembly to the hood and press it into place until it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Window Channel, Front Passenger Side 15766924 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15766924 Window Channel, Front Passenger Side is available in the market under the name GM Weather Strip, Door Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15766924 Window Channel, Front Passenger Side fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15766924 maintains top performance when functioning as the Weatherstrip Assembly-Front Side Door Window *Marked Print unit at its Front Passenger Side. The component 15766924 is constructed from durable material and its dimensions span 37.2 x 28.0 x 2.9 inches while weighing 2.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Run Channel; Weatherstrip, Side Door Window Glass. The part 15766924 has available replacement options 15734150. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.