Make sure this part fits

GM 25775652
Sealing Strip, Driver Side

2002-2009 GM

Customer Questions & Expert Answers (23)
GM 25775652 Sealing Strip, Driver Side
GM 25775652 Sealing Strip, Driver Side
  • Part Description
    Weatherstrip Assembly-Rear Side Door Front Auxiliary; Door Seal
  • Position
    Driver Side
  • Replaces
    15155415, 15284190
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25775652
    Part DescriptionWeatherstrip Assembly-Rear Side Door Front Auxiliary; Door Seal
    Other NamesFront Weatherstrip; Weatherstrip, Side Door Opening; Weatherstrip
    Item Dimensions4.1 x 23.1 x 1.2 inches
    Item Weight0.50 Pounds
    PositionDriver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces15155415, 15284190
    ManufacturerGeneral Motors
    SKU25775652
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25775652 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25775652 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be removed to take off the midgate weatherstrip for the 2005 Buick Rainier? Posted by Customer
    A:
    Remove the pushpins that hold the midgate weatherstrip mold to the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be removed after securing the sliding hinge panel for the 2004 Buick Rainier? Posted by Customer
    A:
    Remove the pushpins that hold the mid gate weatherstrip mold to the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be removed after opening the end gate and moveable roof for the 2004 Buick Rainier? Posted by Customer
    A:
    Remove the push-pins that secure the end gate weatherstrip upper mold from the moveable roof module.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new weatherstrip for the 2007 Buick Rainier? Posted by Customer
    A:
    Carefully place the new weatherstrip onto the perimeter of the sunroof window, ensuring it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step for installation of the new sealing strip for the 2006 Buick Rainier? Posted by Customer
    A:
    Position the new sealing strip onto the pinch-weld flange, starting at the forward edge of the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the rear hood seal for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Take the seal off the inlet grille panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear hood weatherstrip seal for the 2004 Chevrolet Trailblazer? Posted by Customer
    A:
    Open the hood and remove the rear hood seal from the air inlet grille panel studs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the front door sill plate for the 2007 GMC Envoy? Posted by Customer
    A:
    Take off the weatherstrip from the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new liftgate weatherstrip for the 2009 GMC Envoy? Posted by Customer
    A:
    Start at the top center of the liftgate opening, position it to the pinch-weld flange, and work down both the right and left sides towards the bottom center, ensuring not to stretch the weatherstrip during installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the sill plate for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Take off the weatherstrip from the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What tool can be used to ensure full engagement of the weatherstrip for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Use a rubber mallet to ensure full engagement of the weatherstrip to the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in removing the weatherstrip for the 2004 GMC Envoy? Posted by Customer
    A:
    Remove the weatherstrip from the side access door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the installation process for the 2002 GMC Envoy? Posted by Customer
    A:
    Reinstall the screw to secure the sealing strip to the door, tightening it to 1.2 N.m (10 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after exposing the screws for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the screws and take out the weatherstrip side retainer from the windshield pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What do you do with the weatherstrip side retainer screws for the 2008 GMC Envoy? Posted by Customer
    A:
    Remove these screws and take out the weatherstrip side retainer from the windshield pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Is there any additional step that may be necessary to complete the installation for the 2003 Chevrolet Trailblazer? Posted by Customer
    A:
    Yes, spooning of the weatherstrip may be necessary to complete the installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you start replacing the liftgate weatherstrip for the 2006 GMC Envoy? Posted by Customer
    A:
    First, open the liftgate and pull the weatherstrip from the liftgate opening pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be removed from the front door sealing weatherstrip for the 2003 GMC Envoy? Posted by Customer
    A:
    Remove the push pin retainers from the front door sealing weatherstrip at the base of the pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the auxiliary front door weatherstrip for the 2006 Chevrolet Trailblazer? Posted by Customer
    A:
    Open the side doors on either the right or left side.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you align the weatherstrip for the 2004 GMC Envoy? Posted by Customer
    A:
    Use the locator tab to align it with the notch in the door window channel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after detaching the lower molds for the 2005 GMC Envoy? Posted by Customer
    A:
    Detach the weatherstrip from the endgate opening flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the sunroof window weatherstrip for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    First, remove the sunroof window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 25775652, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 25775652 Sealing Strip, Driver Side. It is sometimes referred to as GM Weather Strip, GM Door Seal. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 25775652 Sealing Strip, Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery