Make sure this part fits

GM 25775653
Sealing Strip, Passenger Side

2002-2009 GM

Customer Questions & Expert Answers (23)
GM 25775653 Sealing Strip, Passenger Side
GM 25775653 Sealing Strip, Passenger Side
  • Part Description
    Weatherstrip Assembly-Rear Side Door Front Auxiliary; Door Seal
  • Position
    Passenger Side
  • Replaces
    15155416, 15284191
  • Manufacturer
    General Motors
Make sure this part fits
$6.96 MSRP: $10.35
You Save: $3.39 (33%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25775653 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25775653 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the process for pressing the weatherstrip into place for the 2004 Buick Rainier? Posted by Customer
    A:
    Press the weatherstrip into the mid gate window channel starting at the alignment locations and working around.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2005 Buick Rainier? Posted by Customer
    A:
    Slide the retaining clips down on the sliding hinge panel to release it and close the midgate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the front door window glass weatherstrip for the 2006 Buick Rainier? Posted by Customer
    A:
    Remove the screw that retains the sealing strip to the door using a screwdriver.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after detaching the lower molds for the 2004 Buick Rainier? Posted by Customer
    A:
    Detach the weatherstrip from the end gate opening flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the new weatherstrip for the 2007 Buick Rainier? Posted by Customer
    A:
    Reinstall the sunroof window to the sunroof module assembly and verify that there are no air or water leaks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the weatherstrip for the 2003 Chevrolet Trailblazer? Posted by Customer
    A:
    Close the liftgate window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the weatherstrip for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Finally, close the liftgate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after opening the doors for the 2008 GMC Envoy? Posted by Customer
    A:
    Remove the push pin retainers from the front door sealing weatherstrip at the base of the pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after placing the upper molds for the 2005 GMC Envoy? Posted by Customer
    A:
    Place the weatherstrip onto the bulb flange of the moveable roof, ensuring it cups over the endgate weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the new weatherstrip for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Install the sunroof window back into the sunroof module assembly and verify that there are no air or water leaks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear hood weatherstrip seal for the 2004 Chevrolet Trailblazer? Posted by Customer
    A:
    Open the hood and remove the rear hood seal from the air inlet grille panel studs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new weatherstrip for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    First, attach the weatherstrip side retainer to the windshield pillar and secure it with the screws.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What do you do after pulling back the weatherstrip for the 2006 Chevrolet Trailblazer? Posted by Customer
    A:
    Expose the weatherstrip side retainer screws.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear door weatherstrip for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the rear door sill plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after removing the screw for the 2002 GMC Envoy? Posted by Customer
    A:
    Lift upward on the forward edge of the sealing strip and remove it from the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the new seal for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Close the hood.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the auxiliary rear door weatherstrip for the 2003 GMC Envoy? Posted by Customer
    A:
    Open the side doors on either the right or left side.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should you position the weatherstrip during installation for the 2006 GMC Envoy? Posted by Customer
    A:
    Position the weatherstrip to the pinch-weld flange and work down both the right and left sides towards the bottom center, ensuring not to stretch the weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the water deflector for the 2004 GMC Envoy? Posted by Customer
    A:
    Take out the front window outer belt sealing strip and the front door window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new liftgate weatherstrip for the 2009 GMC Envoy? Posted by Customer
    A:
    Start at the top center of the liftgate opening, position it to the pinch-weld flange, and work down both the right and left sides towards the bottom center, ensuring not to stretch the weatherstrip during installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the upper molded detail for the 2004 GMC Envoy? Posted by Customer
    A:
    Install it to the front of the rear side access door using the integral retaining pins.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2007 GMC Envoy? Posted by Customer
    A:
    Reinstall the front door sill plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Sealing Strip, Passenger Side 25775653 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25775653 Sealing Strip, Passenger Side is available in the market under the name GM Weather Strip, Door Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25775653 Sealing Strip, Passenger Side fits certain Chevrolet Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 25775653 maintains top performance when functioning as the Weatherstrip Assembly-Rear Side Door Front Auxiliary; Door Seal unit at its Passenger Side. The component 25775653 is constructed from durable material and its dimensions span 4.2 x 23.5 x 1.1 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Front Weatherstrip; Weatherstrip, Side Door Opening; Weatherstrip. The part 25775653 has available replacement options 15155416, 15284191. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.