Make sure this part fits

GM 15766923
Window Channel, Front Driver Side

1994-2005 GM

Customer Questions & Expert Answers (15)
GM 15766923 Window Channel, Front Driver Side
  • Part Description
    Weatherstrip, Front Side Door Window
  • Position
    Front Driver Side
  • Replaces
    15734149
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1994-2004 Chevrolet S10Base, LS, SS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1995-2001 GMC JimmyBase, Diamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1994-2004 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1996-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15766923 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15766923 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you detach the weatherstrip from the sunroof window for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Gently pull the weatherstrip away from the sunroof window at one point and continue around the perimeter to detach it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What temperature range should the body area and the drip channel be within for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Both should be within a temperature range of 21-41°C (80-105°F).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the tailgate weatherstrip for the 2002 Chevrolet S10? Posted by Customer
    A:
    Open the liftgate window and firmly grip the weatherstrip to pull it off the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the weatherstrip for the sunroof/moonroof for the 2002 Chevrolet S10? Posted by Customer
    A:
    Begin by pulling the roof drip weatherstrip from the door opening frame and removing any remaining weather strip material or adhesive.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step in replacing the front door auxiliary weatherstrip for the 2002 Chevrolet S10? Posted by Customer
    A:
    The first step is to remove the existing weatherstrip from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What solvent can be used for cleaning the flange for the 2004 Chevrolet S10? Posted by Customer
    A:
    A mixture of 50 percent isopropyl alcohol and 50 percent water or high-flash naptha.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you detach the seal from the upper frame for the 2003 Chevrolet S10? Posted by Customer
    A:
    Pull upward to detach the seal from the front of the upper frame, then finish removing it from the rear of the mainframe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the existing weatherstrip from the door opening for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Gently pull it away from the pinch weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the purpose of the outer door weatherstrip for the 2000 GMC Jimmy? Posted by Customer
    A:
    It seals the inner and outer door panels and the window at the belt line.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after removing the old seal for the 2003 GMC Sonoma? Posted by Customer
    A:
    Position the new seal assembly to the hood and press it into place until it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the weatherstrip for the 2001 GMC Jimmy? Posted by Customer
    A:
    Push the weatherstrip onto the pinch weld flange, starting at the pre-formed corner and working around the entire edge of the door opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you start replacing the rear side door window weatherstrip for the 2000 GMC Jimmy? Posted by Customer
    A:
    First, open the rear side door window and remove the weatherstrip by starting at the butt joint and pulling it from the window opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Why is it important to remove the sunroof window for the 2004 GMC Sonoma? Posted by Customer
    A:
    The sunroof window must be removed to clean the entire frame track of silicone adhesive.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after positioning the weatherstrip for the 2004 GMC Sonoma? Posted by Customer
    A:
    Firmly press the weatherstrip into place, ensuring it is seated properly around the entire perimeter.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Window Channel, Front Driver Side 15766923 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15766923 Window Channel, Front Driver Side is available in the market under the name GM Weather Strip, Door Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15766923 Window Channel, Front Driver Side fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15766923 maintains top performance when functioning as the Weatherstrip, Front Side Door Window unit at its Front Driver Side. The component 15766923 is constructed from durable material and its dimensions span 8.4 x 7.7 x 37.2 inches while weighing 2.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Run Channel; Weatherstrip, Side Door Window Glass. The part 15766923 has available replacement options 15734149. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.