Make sure this part fits

GM 12458067
Sunroof Glass Weatherstrip

1997-2009 GM

Customer Questions & Expert Answers (13)
GM 12458067 Sunroof Glass Weatherstrip
  • Part Description
    Weatherstrip
  • Replaces
    12453782
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2009 Buick LaCrosseCX, CXL, CXS, Super6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    1997-2002 Chevrolet MalibuBase, LS4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
    2004-2007 Chevrolet Monte CarloLS, LT, LTZ, SS6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    1997-1999 Oldsmobile CutlassBase, GL, GLS6 Cyl 3.1 L GAS
    1997 Oldsmobile SilhouetteBase, GL, GLS6 Cyl 3.4 L GAS
    2004-2008, 1997-2002 Pontiac Grand PrixBase, GT, GT1, GT2, GTP, GXP, SE6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    1997 Pontiac Trans SportBase6 Cyl 3.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12458067 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12458067 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the correct positioning for the new window belt inner sealing strip for the 2006 Buick LaCrosse? Posted by Customer
    A:
    Position the new sealing strip to the door flange, ensuring the front end is inserted into the gap formed by the window weatherstrip and the door inner panel, while the rear end is flush with the rear leg of the window weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the old weatherstrip for the 2007 Buick LaCrosse? Posted by Customer
    A:
    Starting at the center bottom of the weatherstrip, pull it upward and away from the pinch-weld flange, then remove it completely from the door opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after the installation for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Inspect the door for proper operation and close it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step for installing the new weatherstrip for the 2005 Buick LaCrosse? Posted by Customer
    A:
    Position the new weatherstrip at the center bottom of the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after removing the door trim panel for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Lower the window to its full down position and lift off the window belt inner sealing strip from the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the adhesive used for installation for the 2001 Chevrolet Malibu? Posted by Customer
    A:
    Apply weatherstrip adhesive GM P/N 12345096 or an equivalent to the weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the old weatherstrip for the 2002 Chevrolet Malibu? Posted by Customer
    A:
    Install the new hood rear weatherstrip onto the pinch weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after securing the weatherstrip for the 2000 Chevrolet Malibu? Posted by Customer
    A:
    Reinstall the upper pillar garnish molding, lower pillar garnish molding, center pillar lower trim panel, center pillar upper trim panel, and finally the carpet retainer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the torque specification for the front screw for the 2005 Chevrolet Monte Carlo? Posted by Customer
    A:
    Install the front screw to the sealing strip and tighten it to 2 N.m (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step for installation after cleaning for the 2001 Chevrolet Malibu? Posted by Customer
    A:
    Apply a small amount of weatherstrip adhesive GM P/N 12345095, or an equivalent to the weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be reinstalled after the weatherstrip is in place for the 2004 Chevrolet Monte Carlo? Posted by Customer
    A:
    Reinstall the carpet retainers, windshield garnish molding, rear upper quarter trim panel, and rear lower quarter trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be ensured while installing the weatherstrip for the 2006 Chevrolet Monte Carlo? Posted by Customer
    A:
    Ensure that the joint butt ends have no gap and are centered in the rocker panel area.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Sunroof Glass Weatherstrip 12458067 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12458067 Sunroof Glass Weatherstrip is available in the market under the name GM Weather Strip. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12458067 Sunroof Glass Weatherstrip fits certain Chevrolet Malibu, Monte Carlo models, as well as Buick LaCrosse. Additionally, it is compatible with Pontiac Grand Prix and Oldsmobile Cutlass, Silhouette models.
The original GM component designated by manufacturer part number 12458067 maintains top performance when functioning as the Weatherstrip unit. The component 12458067 is constructed from durable material and its dimensions span 12.5 x 13.0 x 3.8 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Weatherstrip, Roof Panel. The part 12458067 has available replacement options 12453782. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.