How to Service and Repair the Rear Sway Bar Bushing on 2000 Buick LeSabre?

The service process starts with supporting the vehicle while it's elevated from the ground. First, remove the sway bar link assembly bolt and nut then remove the retainer and insulators from the Control Arm. Start by removing the sway bar clamp bolt afterward you can bend the clamp's open end upwards. Service personnel must uninstall both the sway bar together with the insulators. To install the sway bar and insulators return them to their proper location by placing the insulator slit forward inside the clamp. After ensuring the sway bar maintains center position gently bend its bend link downward so it wraps the insulator before installing the clamp bolt. The fastener notice information within the service precautions section needs your attention. The next step involves putting in place the link assembly insulators and retainers and support bolt and nut. Connect the link assembly and bolt with 13 nm of torque while installing the clamp bolt which requires 33 nm torque. Finally, lower the vehicle.

OEM 2000 Buick LeSabre Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bar Bushings found

View related parts
2000 Buick LeSabre Stabilizer Bar Bushing
Part Number: 25699777
$6.94 MSRP: $12.39
You Save: $5.45 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing; Shaft Bushings; Bushing; Bushings
- Position: Front
- Replaces: 25640441, 25689664
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.3 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25699777
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2000 Buick LeSabre Stabilizer Bar Bushing, Yellow, Rear
Part Number: 20757299
Product Specifications
- Other Name: Insulator-Rear Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing; Stabilizer Bar Insulator; Bushing; Bushings; Insulator, Stabilizer Shaft
- Position: Rear
- Replaces: 25604385
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.4 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 20757299
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2000 Buick LeSabre Stabilizer Bar Bushing
Part Number: 25699776
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing; Shaft Bushings; Bushing; Bushings
- Position: Front
- Replaces: 25689666, 25640440
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 3.8 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25699776
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS

2000 Buick LeSabre Sway Bar Bushing

With a comprehensive array of OEM 2000 Buick LeSabre Sway Bar Bushing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick LeSabre Sway Bar Bushing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Buick LeSabre Parts Questions & Experts Answers

Q: How to Service and Repair the Rear Sway Bar Bushing on 2000 Buick LeSabre?
A: The service process starts with supporting the vehicle while it's elevated from the ground. First, remove the sway bar link assembly bolt and nut then remove the retainer and insulators from the Control Arm. Start by removing the sway bar clamp bolt afterward you can bend the clamp's open end upwards. Service personnel must uninstall both the sway bar together with the insulators. To install the sway bar and insulators return them to their proper location by placing the insulator slit forward inside the clamp. After ensuring the sway bar maintains center position gently bend its bend link downward so it wraps the insulator before installing the clamp bolt. The fastener notice information within the service precautions section needs your attention. The next step involves putting in place the link assembly insulators and retainers and support bolt and nut. Connect the link assembly and bolt with 13 nm of torque while installing the clamp bolt which requires 33 nm torque. Finally, lower the vehicle.