Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 20757299
Stabilizer Bar Bushing, Yellow, Rear

1997-2011 GM

Customer Questions & Expert Answers (19)
GM 20757299 Stabilizer Bar Bushing, Yellow, Rear
GM 20757299 Stabilizer Bar Bushing, Yellow, Rear
GM 20757299 Stabilizer Bar Bushing, Yellow, Rear
  • Part Description
    Insulator-Rear Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing
  • Position
    Rear
  • Replaces
    25604385
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 20757299 Stabilizer Bar Bushing, Yellow, Rear is Ref No. 9 in the diagram below

    1997 Buick Park Avenue Stabilizer Bar Bushing, Yellow, Rear Diagram for 20757299
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 20757299

  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    2006-2011 Buick LucerneCX, CXL, CXL Special Edition, CXS, Super6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
    1997-2005 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    2000-2005 Cadillac DeVilleBase, DHS, DTS, Protection Series8 Cyl 4.6 L GAS
    1998-2004 Cadillac SevilleSLS, STS8 Cyl 4.6 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 20757299 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 20757299 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Service and Repair the Rear Sway Bar Bushing on Buick LeSabre? Posted by Customer
    A:
    The first step to work on the rear sway bar bushing requires a vehicle lift followed by proper support. Bend the open end of the sway bar bracket upwards after removing its retaining bolt. The first step involves removing both the sway bar along with its insulator. The slit on the sway bar insulator should face forward before you connect it to the shaft and you should lower the sway bar bracket to hold the insulator while keeping the shaft in the center. Customers should follow all guidelines specified in the Fastener Notice document for service safety. Install the sway bar bracket retaining bolt while tightening it to 33 Nm (24 ft. lbs.). Finally, lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step after completing the installation for the 2000 Buick LeSabre? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What is the first step to service and repair the stabilizer bushing on the front for the 2001 Buick LeSabre? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What is the first step in the installation process for the 2000 Buick Park Avenue? Posted by Customer
    A:
    Place the stabilizer shaft rubber insulator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What should be removed after raising for the 2000 Buick LeSabre? Posted by Customer
    A:
    Remove the stabilizer shaft clamp bolts, followed by the stabilizer shaft clamp and the stabilizer shaft rubber insulator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What should be removed after raising the 2001 Cadillac DeVille? Posted by Customer
    A:
    Remove the stabilizer shaft bracket bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What is the first step in the installation process for the 2001 Buick Park Avenue? Posted by Customer
    A:
    Lift up on the stabilizer shaft with the pry bar and install the stabilizer shaft insulator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What is the final step after installation for the 2001 Buick Park Avenue? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What is the process for installing the new stabilizer shaft insulator for the 2007 Cadillac DTS? Posted by Customer
    A:
    Use the pry bar to install the new stabilizer shaft insulator onto the stabilizer shaft, then attach the stabilizer shaft insulator bracket to the insulator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What is the next step after attaching the bracket for the 2006 Cadillac DTS? Posted by Customer
    A:
    Install the stabilizer shaft bracket retaining bolts, ensuring to tighten them to 67 Nm (49 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What should be removed after raising for the 2008 Cadillac DTS? Posted by Customer
    A:
    Remove the stabilizer shaft bracket bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What should be removed after raising for the 2007 Cadillac DTS? Posted by Customer
    A:
    Remove the stabilizer shaft bracket retaining bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What is the installation process for the new stabilizer shaft insulator for the 2009 Cadillac DTS? Posted by Customer
    A:
    Use the pry bar to move the stabilizer shaft rearward and install the new stabilizer shaft insulator, ensuring the slit faces forward in the stabilizer shaft bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What is the first step to service and repair the stabilizer bushing with RPO FE1 or FE3 for the 2000 Cadillac DeVille? Posted by Customer
    A:
    First, raise the vehicle and support it by the frame to allow the control arms to hang free.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What should be done with the stabilizer shaft bracket during installation for the 2001 Cadillac DeVille? Posted by Customer
    A:
    Bend the stabilizer shaft bracket downward to secure it around the insulator, ensuring the stabilizer bar insulators nest in the clamps.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What should be done after removing the components from the control arm for the 2000 Cadillac Seville? Posted by Customer
    A:
    Remove the bracket clamp bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What is the installation process for the stabilizer shaft insulator for the 2001 Cadillac Seville? Posted by Customer
    A:
    Use the pry bar to raise the stabilizer shaft and install the stabilizer shaft insulator with the slit facing forward.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    Q:
    What is the torque specification for tightening the stabilizer shaft to frame bolts for the 2000 Cadillac Seville? Posted by Customer
    A:
    Tighten to 33 Nm (24 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Sway Bar Bushing
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Stabilizer Bar Bushing, Yellow, Rear 20757299 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 20757299 Stabilizer Bar Bushing, Yellow, Rear is available in the market under the name GM Sway Bar Bushing. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 20757299 Stabilizer Bar Bushing, Yellow, Rear fits certain Cadillac DTS, DeVille, Seville models, as well as Buick LeSabre, Lucerne, Park Avenue models.
The original GM component designated by manufacturer part number 20757299 maintains top performance when functioning as the Insulator-Rear Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing unit at its Rear. The component 20757299 is constructed from durable material and its dimensions span 3.4 x 3.1 x 3.1 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Stabilizer Bar Insulator; Bushing; Bushings; Insulator, Stabilizer Shaft. The part 20757299 has available replacement options 25604385. Each vehicle needs 2 units of the part marked as SKU 20757299. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.