How to Service and Repair the Rear Sway Bar Bushing on 2000 Cadillac Seville?

Beginning the service and repair process of the rear Sway Bar Bushing requires first lifting the vehicle with proper support. The service requires removal of sway bar shaft link assembly bolt and its matching nut while also taking out the retainer and insulators from the Control Arm. After that, remove the bracket clamp bolt. You should bend open the clamp end upward to get the sway bar insulators then extract the sway bar shaft. After aligning the sway bar shaft install the insulators into the bracket clamp while ensuring its slit points toward the front position. The insulation installation requires a bracket downward bend for stabilization of the insulator position while making sure the sway bar insulators properly fit within their clamps; any insufficient fit requires new clamp replacement. Fitting the bracket bolts requires that the sway bar shaft maintains its central position. Swing the open clamp toward the bar before carefully pushing the clamp to reach the insulators then fold the clamp closed around them. Set the sway bar link assembly insulators inside the clamps with their slit orientation forward before tightening the link assembly nut and bolt to 13 nm (9 ft. Lbs.) and sway bar shaft bracket bolt to 33 nm (24 ft. Lbs.). Finally, lower the vehicle.

OEM 2000 Cadillac Seville Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Sway Bar Bushings found

View related parts
2000 Cadillac Seville Stabilizer Bar Bushing
Part Number: 25666235
$8.87 MSRP: $10.88
You Save: $2.01 (19%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Sway Bar Bushing; Insulator; Bushings
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.1 x 2.0 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25666235
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS
View related parts
2000 Cadillac Seville Stabilizer Bar Bushing
Part Number: 25699778
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing; Shaft Bushings; Bushing; Bushings
- Position: Front
- Replaces: 25689665
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 3.2 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25699778
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS
View related parts
2000 Cadillac Seville Stabilizer Bar Bushing, Yellow, Rear
Part Number: 20757299
Product Specifications
- Other Name: Insulator-Rear Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing; Stabilizer Bar Insulator; Bushing; Bushings; Insulator, Stabilizer Shaft
- Position: Rear
- Replaces: 25604385
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.4 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 20757299
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS
View related parts
2000 Cadillac Seville Stabilizer Bar Bushing
Part Number: 25699776
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing; Shaft Bushings; Bushing; Bushings
- Position: Front
- Replaces: 25689666, 25640440
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 3.8 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25699776
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS

2000 Cadillac Seville Sway Bar Bushing

With a comprehensive array of OEM 2000 Cadillac Seville Sway Bar Bushing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Cadillac Seville Sway Bar Bushing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Cadillac Seville Sway Bar Bushing Parts Questions & Experts Answers

Q: How to Service and Repair the Rear Sway Bar Bushing on 2000 Cadillac Seville?
A: Beginning the service and repair process of the rear Sway Bar Bushing requires first lifting the vehicle with proper support. The service requires removal of sway bar shaft link assembly bolt and its matching nut while also taking out the retainer and insulators from the Control Arm. After that, remove the bracket clamp bolt. You should bend open the clamp end upward to get the sway bar insulators then extract the sway bar shaft. After aligning the sway bar shaft install the insulators into the bracket clamp while ensuring its slit points toward the front position. The insulation installation requires a bracket downward bend for stabilization of the insulator position while making sure the sway bar insulators properly fit within their clamps; any insufficient fit requires new clamp replacement. Fitting the bracket bolts requires that the sway bar shaft maintains its central position. Swing the open clamp toward the bar before carefully pushing the clamp to reach the insulators then fold the clamp closed around them. Set the sway bar link assembly insulators inside the clamps with their slit orientation forward before tightening the link assembly nut and bolt to 13 nm (9 ft. Lbs.) and sway bar shaft bracket bolt to 33 nm (24 ft. Lbs.). Finally, lower the vehicle.