How to service and repair the Brake Fluid Level Sensor/Switch on 2000 Buick Park Avenue?

The first thing to do when servicing or repairing the Brake Fluid Level Sensor/Switch is to disconnect the electrical connector from the switch. Once you have disconnected the connector, use pliers to take the switch out of the reservoir. Snap the sensor into its place and attach the connector to it for installation.

OEM 2000 Buick Park Avenue Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
2000 Buick Park Avenue Level Sensor
Part Number: 18029762
Product Specifications
- Other Name: Switch, Brake Fluid Level Indicator; Brake Pressure Warning Switch; Fluid Sensor; Fluid Indicator; Switch, Brake Master Cylinder Reservoir
- Replaces: 18029854, 18018823
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.3 x 1.2 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18029762
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2000 Buick Park Avenue Brake Fluid Level Sensor

With a comprehensive array of OEM 2000 Buick Park Avenue Brake Fluid Level Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick Park Avenue Brake Fluid Level Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Buick Park Avenue Parts Questions & Experts Answers

Q: How to service and repair the Brake Fluid Level Sensor/Switch on 2000 Buick Park Avenue?
A: The first thing to do when servicing or repairing the Brake Fluid Level Sensor/Switch is to disconnect the electrical connector from the switch. Once you have disconnected the connector, use pliers to take the switch out of the reservoir. Snap the sensor into its place and attach the connector to it for installation.