ChevyParts
My Garage
My Account
Cart
OEM 2000 Buick Park Avenue Brake Line
Brake Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Brake Lines found
Product Specifications- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 17999820, 22163668, 22113390
- Item Weight: 11.20 Pounds
- Item Dimensions: 0.2 x 4.4 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366759
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Front Flex Hose; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 22163448, 17999966, 22163886
- Item Weight: 0.80 Pounds
- Item Dimensions: 19.5 x 4.2 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366761
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Front Flex Hose; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 22163885, 22163447, 17999817
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.3 x 3.1 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366760
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2000 Buick Park Avenue Brake Line
With a comprehensive array of OEM 2000 Buick Park Avenue Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick Park Avenue Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2000 Buick Park Avenue Parts Questions & Experts Answers
- Q: How to replace the rear brake line on 2000 Buick Park Avenue?A: Start brake hose replacement by lifting and supporting your vehicle before taking off the wheel and tire assembly. Eliminate all dirt and foreign particles from the brake hose and pipe fittings. Plug the open brake pipe end with a rubber cap to avoid brake fluid leaks and contamination. Work to remove the brake hose retainer using a flat tool before taking the brake hose out from its bracket. Undo the brake caliper bolt and take out the brake hose and discard both copper gaskets that stick to the caliper. Plugging the brake caliper bolt hole with rubber seals protects brake fluid from leaking during work. To install the brake hose replace the rubber plug then use new copper brake hose gaskets along with the brake hose bolt assembly. Mount the brake hose bolt to the brake caliper at 45 nm torque, but avoid twisting or bending the hose during installation. Put the brake hose in place under its bracket then lock the hose retainer while taking off the rubber protection from the brake pipe fitting. Secure the brake pipe fitting directly onto the brake hose with 15 newton-meter torque. Drive the vehicle only when you have firm pedal brake control because air in the brake system can steal your brakes and put your safety at risk. Press brake caliper bleed at its screw port and reinstall the wheel assembly before letting the vehicle down.
Related 2000 Buick Park Avenue Parts
2000 Buick Park Avenue ABS Control Module
2000 Buick Park Avenue Brake Caliper Bolt
2000 Buick Park Avenue Brake Caliper Bracket
2000 Buick Park Avenue Brake Caliper Piston
2000 Buick Park Avenue Brake Calipers
2000 Buick Park Avenue Brake Disc
2000 Buick Park Avenue Brake Dust Shields
2000 Buick Park Avenue Brake Fluid Level Sensor
2000 Buick Park Avenue Brake Master Cylinder
2000 Buick Park Avenue Brake Pad
2000 Buick Park Avenue Brake Proportioning Valve
2000 Buick Park Avenue Hydraulic Hose