How to replace the upper intake manifold on 2000 Buick Park Avenue?

The upper Intake Manifold then needs to be unbolted from the top of the engine and removed. Remove the fuel injector sight shield, air cleaner intake duct, and the Spark Plug Wires from the right side of the engine, placing the wires aside. Next, take off the manifold vacuum source, depressurise the fuel lines and take out the Fuel Rail. Always remove the egr heat shield, the cable bracket to the cylinder head mounting bolt and plug, accelerator cable and throttle body support bracket. After that, undo the bolts of the upper Intake Manifold, then remove the upper Intake Manifold. For installation, reconnect the upper Intake Manifold in position and tighten the upper Intake Manifold bolts in sequence to 10 nm (89 inch lbs.). Install the throttle body support bracket, accelerator cable, cable bracket to cylinder head mounting bolt, egr heat shield, Fuel Rail, manifold vacuum source, and reconnect the spark plug wire (s) to the right side of engine. Lastly install the air cleaner intake duct and the fuel injector sight shield before reconnecting the negative cable of the battery.

OEM 2000 Buick Park Avenue Intake Manifold

Engine Intake Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Intake Manifolds found

View related parts
2000 Buick Park Avenue Manifold Part Number: 24503488
$7.44 MSRP: $11.67
You Save: $4.23 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold-Vacuum Source; Intake Manifold; Manifold, Intake Manifold Vacuum
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.3 x 2.2 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24503488
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2000 Buick Park Avenue Intake Manifold Part Number: 19417844
Product Specifications
- Other Name: Manifold, Engine Fuel Intake Manifold
- Replaces: 24505728, 24508923
- Item Weight: 13.10 Pounds
- Item Dimensions: 6.1 x 26.3 x 13.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19417844
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2000 Buick Park Avenue Intake Manifold, Lower Part Number: 24505729
Product Specifications
- Other Name: Manifold Assembly-Lower Intake; Manifold; Manifold, Engine Fuel Intake Manifold
- Position: Lower
- Item Weight: 13.30 Pounds
- Item Dimensions: 19.8 x 13.3 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24505729
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2000 Buick Park Avenue Intake Manifold

With a comprehensive array of OEM 2000 Buick Park Avenue Intake Manifold, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick Park Avenue Intake Manifold are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Buick Park Avenue Intake Manifold Parts and Q&A

Q: How to replace the upper intake manifold on 2000 Buick Park Avenue?
A: The upper Intake Manifold then needs to be unbolted from the top of the engine and removed. Remove the fuel injector sight shield, air cleaner intake duct, and the Spark Plug Wires from the right side of the engine, placing the wires aside. Next, take off the manifold vacuum source, depressurise the fuel lines and take out the Fuel Rail. Always remove the egr heat shield, the cable bracket to the cylinder head mounting bolt and plug, accelerator cable and throttle body support bracket. After that, undo the bolts of the upper Intake Manifold, then remove the upper Intake Manifold. For installation, reconnect the upper Intake Manifold in position and tighten the upper Intake Manifold bolts in sequence to 10 nm (89 inch lbs.). Install the throttle body support bracket, accelerator cable, cable bracket to cylinder head mounting bolt, egr heat shield, Fuel Rail, manifold vacuum source, and reconnect the spark plug wire (s) to the right side of engine. Lastly install the air cleaner intake duct and the fuel injector sight shield before reconnecting the negative cable of the battery.