How to replace the wiper motor on 2000 Buick Park Avenue?

Starting replacement work requires you to take off the wipers and air inlet panel. Sever the transmission drive link socket from the Wiper Motor assembly crank arm with the wiper transmission separator tool j 39232. Take out the Wiper Motor by first disconnecting its electrical connector then unscrewing and removing the three fasteners. Put the Wiper Motor in its designated spot on the vehicle and fasten it using the three screws which you should turn to 8 n.m limit. Hook up the electrical connector to the Wiper Motor while using j 39529 to place the transmission drive link socket on the ball of the Wiper Motor crank arm. Put the wiper arms back in place before putting on the air inlet grille panel.

OEM 2000 Buick Park Avenue Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Motor found

View related parts
2000 Buick Park Avenue Wiper Motor Part Number: 19150336
Product Specifications
- Other Name: Motor Kit, Windshield Wiper; Motor Kit, Windshield Wiper Motor
- Replaces: 12487674, 12463032, 12365399, 12368649, 12365345, 12487619
- Item Weight: 15.80 Pounds
- Item Dimensions: 12.1 x 7.0 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19150336
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2000 Buick Park Avenue Wiper Motor

With a comprehensive array of OEM 2000 Buick Park Avenue Wiper Motor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick Park Avenue Wiper Motor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Buick Park Avenue Wiper Motor Parts and Q&A

Q: How to replace the wiper motor on 2000 Buick Park Avenue?
A: Starting replacement work requires you to take off the wipers and air inlet panel. Sever the transmission drive link socket from the Wiper Motor assembly crank arm with the wiper transmission separator tool j 39232. Take out the Wiper Motor by first disconnecting its electrical connector then unscrewing and removing the three fasteners. Put the Wiper Motor in its designated spot on the vehicle and fasten it using the three screws which you should turn to 8 n.m limit. Hook up the electrical connector to the Wiper Motor while using j 39529 to place the transmission drive link socket on the ball of the Wiper Motor crank arm. Put the wiper arms back in place before putting on the air inlet grille panel.