ChevyParts
My Garage
My Account
Cart
OEM 2000 Buick Park Avenue Wiper Arm
Windshield Wiper Arm- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Wiper Arms found
Product Specifications- Other Name: Wiper, Windshield Wiper Blade; Windshield Wiper Blade Refills; Wiper Blade Insert; Wiper Insert; Blade Insert; Blade Assembly Insert; Insert; Wiper, Windshield Wiper; Wiper Blade
- Item Weight: 0.60 Pounds
- Item Dimensions: 25.1 x 3.5 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22143943
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Arm, Windshield Wiper Arm
- Position: Driver Side
- Replaces: 25654881, 25692924, 25695419, 25666847
- Item Weight: 1.20 Pounds
- Item Dimensions: 23.5 x 3.7 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25713947
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Arm, Windshield Wiper Arm
- Position: Passenger Side
- Replaces: 25642728, 25680729, 25695418
- Item Weight: 1.20 Pounds
- Item Dimensions: 27.2 x 2.2 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25713948
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2000 Buick Park Avenue Wiper Arm
With a comprehensive array of OEM 2000 Buick Park Avenue Wiper Arm, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick Park Avenue Wiper Arm are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2000 Buick Park Avenue Parts Questions & Experts Answers
- Q: How to service and repair the wiper arm on 2000 Buick Park Avenue?A: Set the wipers to delay or auto delay mode while placing the ignition key in accy position prior to starting Wiper Arm service and repair. Turn off the ignition once you place the wiper arms in the stationary inner wipe position. Use the washer hose's connection to mark the blade's position on the windshield before you disconnect it from the hose connector. Adjust the hood to reveal the nut then open the cover to take out the nut. When the Wiper Arm does not move after rocking you have to apply a battery terminal puller to remove it. Scrub the Drive Shaft knurls with wire brushing and take off the Wiper Blade from its mounting arm if required. First attach the Wiper Blade back on before inserting the Wiper Arm onto the transmission Drive Shaft and placing it centered according to the mark you previously created. Before tightening the nut secure 25 n.m (18 lb ft) let the Wiper Arm move to reach the mark. You should recorrect the Wiper Arm position if needed. Attach the washer hose using windshield washer solvent on the hose connector to help installation work smoothly. Test the windshield wiping system with running wipers before ending in park position.
Related 2000 Buick Park Avenue Parts
2000 Buick Park Avenue Body Mount Hole Plug
2000 Buick Park Avenue Car Speakers
2000 Buick Park Avenue Door Hinge
2000 Buick Park Avenue Door Latch Assembly
2000 Buick Park Avenue Door Lock Actuator
2000 Buick Park Avenue Door Lock Cylinder
2000 Buick Park Avenue Door Seal
2000 Buick Park Avenue Washer Pump
2000 Buick Park Avenue Washer Reservoir
2000 Buick Park Avenue Windshield Wiper
2000 Buick Park Avenue Wiper Blade
2000 Buick Park Avenue Wiper Motor