OEM 2000 Buick Regal Crankshaft Seal

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Seals found

  • 2000 Buick Regal Crankshaft Seal - 12582320
    2000 Buick Regal Crankshaft Seal Diagram - 12582320
    View related parts

    2000 Buick Regal Rear Main Seal

    Part Number: 12582320
    $20.83 MSRP: $34.31
    You Save: $13.48 (40%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Seal, Engine Rear Main Bearing; Crankshaft Seal; Seal
    • Position: Rear
    • Replaces: 25534760
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 4.4 x 4.5 x 0.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 12582320
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2000 Buick Regal Submodels:
    • 25th Anniversary Edition, Custom, Gran Sport, GS, GSE, Limited, LS, LSE, Olympic Gold Edition | 6 Cyl 3.8 L GAS
  • 2000 Buick Regal Crankshaft Seal - 12582313
    2000 Buick Regal Crankshaft Seal Diagram - 12582313
    View related parts

    2000 Buick Regal Crankshaft Seal, Front

    Part Number: 12582313
    $12.23 MSRP: $20.14
    You Save: $7.91 (40%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Seal Assembly-Crankshaft Front Oil; Timing Cover Gasket; Timing Cover Seal; Front Seal; Cover Seal; Crankshaft Balance Seal; Timing Cover Seal; Engine Front Cover Seal
    • Position: Front
    • Replaces: 24504098
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 4.2 x 4.3 x 0.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 12582313
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2000 Buick Regal Submodels:
    • 25th Anniversary Edition, Custom, Gran Sport, GS, GSE, Limited, LS, LSE, Olympic Gold Edition | 6 Cyl 3.8 L GAS

2000 Buick Regal Crankshaft Seal

With a comprehensive array of OEM 2000 Buick Regal Crankshaft Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick Regal Crankshaft Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Buick Regal Parts Questions & Experts Answers

  • Q: How to replace the rear crankshaft seal on 2000 Buick Regal?
    A: To replace the Crankshaft rear oil seal, you need to remove the engine Flywheel first. Status-adjust and verify the presence of leak of lubricating oil from the Crankshaft rear oil seal without causing any damage to the Crankshaft od and chamfer by using any device. Pull out the Crankshaft rear oil seal, by inserting a flat-bladed tool, through the dust lips at an angle and prying it from the side of the Crankshaft by moving the handle close to the Crankshaft end, repeat as required. Check the id of the bore and repair or replace the Crankshaft rear oil seal housing as necessary and inspect the crank for nicks or burrs on that side of the Crankshaft that touches the seal and repair or replace the crank as necessary. Installation is with the help of j38196 rear Crankshaft Seal installer (J38196) by applying the engine oil on the inside and outside diameter of the new Crankshaft rear oil seal and to slide it over the mandrel until it bottoms against the collar of the j38196. Mount the j38196 to the Crankshaft by hand or tighten the screws to 5 nm (54 inch lbs), then rotate the t-handle of the j38196 to compress the seal into the bore until the collar touches the case for correct seating. Loosen the t.handle and release it until it does not loosen for another installation and remove the mounting screws. Lastly, re-install the engine Flywheel, check for the right amounts of fluids and look for leaks.

Related 2000 Buick Regal Parts