OEM 2000 Cadillac DeVille Fuse Box

2000 Cadillac DeVille Fuse Box Parts and Q&A

• Q: How to Replace an Underhood Fuse Box on 2000 Cadillac DeVille?

  A: The first step to replace the underhood Fuse Box requires users to disconnect the negative Battery Cable from the battery followed by covering the underhood Fuse Box. The positive battery cables nut requires disconnection from the underhood Fuse Box followed by detachment of four locking tabs until the assembly clears the base. First drive off the three screws that retain the underhood Fuse Box connectors then remove the engine harness connector from this box to pull out the Fuse Box from the vehicle. First connect the engine harness electrical connector to the underhood Fuse Box along with a proper base placement while tightening the screw retaining connectors to 7 n.m (62 lb in). The Fuse Box installation process requires connecting the positive battery cables nut to the underhood Fuse Box before tightening it to 12 n.m (106 lb in). Then, fit the cover onto the underhood Fuse Box followed by reconnection of the negative Battery Cable to the battery.