How to Service the Crankshaft Position Sensor on 2000 Chevrolet Corvette?

First disconnect the negative Battery Cable when servicing Crankshaft Position Sensor. Lift the car and uninstall the Starter. Hunt down the crankshaft position (CKP) sensor electrical link and unplug the link, being attentive to clean the area close by the ckp to obstruct debris from infiltrating the engine. Disengage the ckp sensor retaining bolt followed by the ckp sensor itself. Put the ckp sensor back into position and install the retaining bolt, tightening it to 25nm (18lb ft). Reattach the ckp sensor electrical connector, the Starter fixed back, the vehicle lowered back, and the negative Battery Cable reattached. Finally, idle learn procedure and program the transmitters if necessary.

OEM 2000 Chevrolet Corvette Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2000 Chevrolet Corvette Crankshaft Position Sensor
Part Number: 12560228
$65.79 MSRP: $117.48
You Save: $51.69 (44%)
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Crankshaft Sensor
- Replaces: 12555566
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.4 x 2.9 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12560228
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS

2000 Chevrolet Corvette Crankshaft Position Sensor

With a comprehensive array of OEM 2000 Chevrolet Corvette Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Corvette Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Corvette Parts Questions & Experts Answers

Q: How to Service the Crankshaft Position Sensor on 2000 Chevrolet Corvette?
A: First disconnect the negative Battery Cable when servicing Crankshaft Position Sensor. Lift the car and uninstall the Starter. Hunt down the crankshaft position (CKP) sensor electrical link and unplug the link, being attentive to clean the area close by the ckp to obstruct debris from infiltrating the engine. Disengage the ckp sensor retaining bolt followed by the ckp sensor itself. Put the ckp sensor back into position and install the retaining bolt, tightening it to 25nm (18lb ft). Reattach the ckp sensor electrical connector, the Starter fixed back, the vehicle lowered back, and the negative Battery Cable reattached. Finally, idle learn procedure and program the transmitters if necessary.

Related 2000 Chevrolet Corvette Parts

Alternate Year Models

1999 Chevrolet Corvette Crankshaft Position Sensor 2001 Chevrolet Corvette Crankshaft Position Sensor