OEM 2000 Chevrolet Tracker Brake Drum

2000 Chevrolet Tracker Brake Drum Parts Questions & Experts Answers

• Q: How to replace the brake drum on 2000 Chevrolet Tracker?

  A: First check that the park brake lever is released before you replace the Brake Drum. You need to first remove the 4 screws (1,3,4,6) alongside the two clips (2,5) before raising the console. Apply the necessary steps by loose parking brake cable lock nut then elevate and support the vehicle. Start by removing the tire along with the wheel. Afterward, pull off the locking washers from the wheel studs. You can remove a drum that does not come off by hand by inserting two 8 mm bolts which will force the drum off the hub. To install the Brake Drum first check the Brake Shoe outer diameter because the correct measure should fall within 219.4 mm to 219.7 mm. During installation check the adjuster and make any necessary modifications. Please install the Brake Drum after cleaning it completely of any dirt or oil residue and put back on the locking washers to the wheel studs and the tire and wheel assembly. Lower your vehicle and apply firm pressure to the Brake Pedal between three to ten times with a force of thirty kilograms (66 pounds) for the right drum-to-shoe clearance. You should finish the adjustments by installing the console through its four screws (1,3,4,6) and two clips (2,5).