OEM 2000 Chevrolet Tracker Fuel Injector

2000 Chevrolet Tracker Fuel Injector Parts Questions & Experts Answers

• Q: How to service and repair the fuel injector on 2000 Chevrolet Tracker?

  A: Proceeding with the service or repair of a Fuel Injector requires a step where users should first release the fuel pressure. The first step requires removal of the Throttle Body followed by disconnecting the electrical connector that powers the Fuel Injector. Move on to the hold down bracket at the rear of the Intake Manifold for removal while following it with the bracket bolts extracted from the Intake Manifold before bracket removal. Start by detaching the high pressure and return hoses from the fuel pipes then removing the fuel pipes hold down bracket bolt. First disconnect the 3 retaining bolts attaching the Fuel Rail. Following that, pull out the Fuel Rail and the fuel injectors. Pre-installation tasks require motor oil coating on the fuel injectors o-rings which should then be positioned onto the Fuel Rail before securing the Fuel Rail onto the Intake Manifold while tightening the 3 retaining bolts to 30 n.m (22 lb ft). As the next step install the fuel pipes hold down bolt then secure it to 25 n.m (19 lb ft). Afterward install the Intake Manifold reinforcement bracket and tighten both retaining bolts to 25 n.m (19 lb ft). After installing electrical connectors to fuel injectors you should apply the code reader and activate the fuel pump through the ignition before checking for leaks. Any necessary repairs must also be completed.