Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2000 Chevrolet Venture Crankshaft Seal

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Seals found

  • 2000 Chevy Venture Crankshaft Seal - 12592195
    2000 Chevy Venture Crankshaft Seal - 12592195
    2000 Chevy Venture Crankshaft Seal Diagram - 12592195
    View related parts

    2000 Chevrolet Venture Rear Main Seal Part Number: 12592195

    $45.01 MSRP: $76.64
    You Save: $31.63 (42%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Seal, Engine Rear Main Bearing; Crankshaft Seal; Timing Cover Seal; Rear Main Seal Retainer; Seal Kit, Engine Rear Main Bearing
    • Position: Rear
    • Replaces: 14085829
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 4.3 x 4.1 x 0.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 12592195
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2000 Chevrolet Venture Submodels:
    • Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
  • 2000 Chevy Venture Crankshaft Seal - 14090906
    2000 Chevy Venture Crankshaft Seal - 14090906
    2000 Chevy Venture Crankshaft Seal Diagram - 14090906
    View related parts

    2000 Chevrolet Venture Rear Main Seal, Front Part Number: 14090906

    $21.53 MSRP: $35.47
    You Save: $13.94 (40%)
    ADD TO CART
    Product Specifications
    • Other Name: Seal, Engine Front Cover & Crankshaft Seal; Timing Cover Gasket; Timing Cover Seal; Oil Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Seal; Front Cover Seal; Engine Front Cover Seal.
    • Position: Front
    • Replaces: 12577710
    • Item Weight: 0.30 Pounds
    • Item Dimensions: 3.0 x 3.0 x 0.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 14090906
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2000 Chevrolet Venture Submodels:
    • Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2000 Chevrolet Venture Crankshaft Seal

With a comprehensive array of OEM 2000 Chevrolet Venture Crankshaft Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Venture Crankshaft Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Venture Crankshaft Seal Parts and Q&A

  • Q: How to Service and Repair the Crankshaft Seal on 2000 Chevrolet Venture?
    A: Service and repair of the Crankshaft main bearing seal follows a process starting with transaxle and Flywheel removal before extracting the Crankshaft rear oil seal while protecting Crankshaft integrity and seal bore alignment. Prise the Crankshaft rear oil seal out using an appropriate tool. A Crankshaft rear oil seal installer (J 34686) represents the necessary tool for seal installation. Apply engine oil all over the new Crankshaft rear oil seal where it meets both inside and outside dimensions. Push the seal completely onto the mandrel allowing it to stop at the tool's collar position. The dowel pin of the Crankshaft rear oil seal installer (J 34686) must match the Crankshaft dowel pin before applying hand pressure to install the tool or turning its attaching screws to 5 nm (45 inch lbs.). Use the t-handle of the Crankshaft rear oil seal installer (J 34686) to activate the collar which pushes the seal into position within the bore adequately. Use the t-handle to reach the point of stop and extract the attaching screws one by one. Replace the engine Flywheel and transaxle as the final step.

Related 2000 Chevrolet Venture Parts

Alternate Year Models

+
1999 Chevrolet Venture Crankshaft Seal 2001 Chevrolet Venture Crankshaft Seal