OEM 2000 GMC Savana 3500 Ignition Coil

2000 GMC Savana 3500 Ignition Coil Parts and Q&A

• Q: How to service and repair the ignition coil on 2000 GMC Savana 3500?

  A: Service and repair of the Ignition Coil requires engine cover removal when present along with both air cleaner assembly and nut. Start by disconnecting electrical connectors before removing the Ignition Coil wire connected to the Distributor. The first step requires removing studs holding the bracket and Ignition Coil onto the Intake Manifold while you remove these two components from the system. The two rivets securing the Ignition Coil to its bracket need drilling and punching before separating the Ignition Coil from the bracket. The new Ignition Coil installation kit contains two screws to mount the Ignition Coil onto its bracket. Attach the Ignition Coil to its bracket using screws before tighten the studs to 11 n.m (8 lb ft) torque specifications when you mount the Ignition Coil assembly to the Intake Manifold. When connecting the Ignition Coil wire make sure it stays away from the dip stick component to avoid long-term grounding or shorting. When finished replace the engine cover if present while setting it all back with the correct nut on the air cleaner assembly and reconnecting all electrical connectors.