How to replace the MAP Sensor on 2001 Buick Century?

To replace the Manifold Absolute Pressure (MAP) sensor, always start by turning OFF the ignition. Unscrew the fixing screws that secure the MAP sensor to the bracket and then remove the MAP sensor's electric connector and MAP inlet vacuum hose. Once you take out the MAP sensor from the bracket, take the new MAP sensor and place it in the bracket's placement. Connect the MAP inlet vacuum hose and the MAP sensor electrical connector, while observing the Fastener Notice in Service Precautions. Last, put in the screws and tighten them to 3 N.m (27 lb in).

OEM 2001 Buick Century MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2001 Buick Century M.A.P. Sensor, Green, Passenger Side
Part Number: 12569240
$64.92 MSRP: $126.03
You Save: $61.11 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor; MAP Sensor; Pressure Sensor; Manifold Pressure Sensor; Emission Control Sensors (Vehicle Speed, Oxygen)
- Position: Passenger Side
- Replaces: 16254719, 16137039
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 3.0 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12569240
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Century Submodels:
- Custom, Estate, Estate Wagon, Limited, Olympia Limited, Special, T-Type | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL

2001 Buick Century MAP Sensor

With a comprehensive array of OEM 2001 Buick Century MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Buick Century MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Buick Century Parts Questions & Experts Answers

Q: How to replace the MAP Sensor on 2001 Buick Century?
A: To replace the Manifold Absolute Pressure (MAP) sensor, always start by turning OFF the ignition. Unscrew the fixing screws that secure the MAP sensor to the bracket and then remove the MAP sensor's electric connector and MAP inlet vacuum hose. Once you take out the MAP sensor from the bracket, take the new MAP sensor and place it in the bracket's placement. Connect the MAP inlet vacuum hose and the MAP sensor electrical connector, while observing the Fastener Notice in Service Precautions. Last, put in the screws and tighten them to 3 N.m (27 lb in).