OEM 2001 Buick Century Rocker Arm

Engine Rocker Arm
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rocker Arm found

  • 2001 Buick Century Rocker Arm - 24504436
    2001 Buick Century Rocker Arm Diagram - 24504436
    View related parts
    Product Specifications
    • Other Name: Arm Assembly-Valve Rocker; Rocker Arm; Arm, Engine Valve Rocker
    • Item Weight: 1.40 Pounds
    • Item Dimensions: 3.3 x 3.2 x 3.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • Require Quantity: 12
    • SKU: 24504436
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2001 Buick Century Submodels:
    • Custom, Limited, Special | 6 Cyl 3.1 L GAS

2001 Buick Century Rocker Arm

With a comprehensive array of OEM 2001 Buick Century Rocker Arm, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Buick Century Rocker Arm are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Buick Century Rocker Arm Parts Questions & Experts Answers

  • Q: How to replace the valve rocker arm and push rods on 2001 Buick Century?
    A: The process to replace valve rocker arms and push rods begins with unfastening the valve Rocker Arm covers together with the Rocker Arm bolts before extracting the rocker arms from their location. The valve train components should go into a rack to guarantee their proper original placement during reinstallation. The intake pushrods that mechanics must use measure 144.18 mm (5.68 inch) and exhaust pushrods measure 152.51 mm (6.0 inch) long. Caring removal of pushrods should happen to avoid dropping them into the lifter valley. Next, remove the Pushrod(s). Apply prelude gm p/n 1052365 or its equivalent to the bearing surfaces of the rocker arms and pushrods and Rocker Arm bolts before installing all parts to their original positions. Install the intake valve pushrods which measure 144.18 mm (5.68 inch) in length while using prelude gm p/n 1052365 or equivalent to coat the both Pushrod ends. The exhaust valve pushrods should have a length of 152.51 mm (6.0 inch) before installation. Following component installation it is important to apply proper torque when tightening Rocker Arm bolt(s) to 14 nm (124 inch lbs.) with an additional 30 degrees angle. Position the valve Rocker Arm cover(s) as the last step.

Related 2001 Buick Century Parts