Other Name: Arm Kit, Valve Rocker; Rocker Arm; Arm Kit, Engine Valve Rocker
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1987-1989 Buick Century | Custom, Estate Wagon, Limited | 6 Cyl 2.8 L GAS
Buick Century Rocker Arm
Our website offers an extensive catalog of genuine Buick Century Rocker Arm at unbeatable prices. Every OEM Buick Century Rocker Arm comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Buick Century Rocker Arm Parts Questions & Experts Answers
Q: How to service and repair the valve rocker arm and push rod on Buick Century?
A: The procedure starts with left or right valve rocker covers removal before bullens are taken out along with the push rod against potential loss into the lifter valley. First remove the Rocker Arm bolts and discard them while organizing all valve train elements on a rack according to their original positions before carefully removing the Pushrods to avoid accidental fall into the lifter valley. Complete the valve Rocker Arm removal process by taking away the rocker arms together with pushrods. The Pushrod installation begins by applying prelube gm p/n 1052367 (Canadian P/N 992869) or its equivalent to the Pushrod ends where the length of the intake rods matches 144 mm (5.68 inches) while the exhaust rods extend to 152.5 mm (6.0 inches). Reinstall pushrods together with rocker arms to their initial positions and replace each bolt with a new one. Use the torque angle meter (J 36660-A) to apply an additional 30-degree rotation of bolt torque to 14 nm (124 in. Lbs.). As a concluding step you need to install the left or right valve Rocker Arm covers.