How to replace the Radius Heat Shield on 2001 Buick LeSabre?

Begin power steering gear heat shield replacement by raising the vehicle and supporting it in place followed by removing stabilizer shaft links and rotating the stabilizer shaft downwards. After removing the plastic clip from the power steering gear heat shield you need to uninstall the heat shield's retaining bolts to extract the heat shield. The power steering gear heat shield installation requires placement of the new component so use the fastener notice the tech manual outlines for service precautions. Fasten the heat shield using its retaining bolts to 9 nm (79 inch lbs.) torque before restoring the plastic clip. Reinsert both stabilizer shaft links and lower your vehicle into place.

OEM 2001 Buick LeSabre Radius Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Radius Heat Shield found

View related parts
2001 Buick LeSabre Heat Shield Part Number: 25644269
Product Specifications
- Other Name: Shield, Steering Gear Mounting; Radius Heat Shield; Gear Assembly Heat Shield; Shield
- Item Weight: 1.30 Pounds
- Item Dimensions: 21.8 x 12.0 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25644269
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS

2001 Buick LeSabre Radius Heat Shield

With a comprehensive array of OEM 2001 Buick LeSabre Radius Heat Shield, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Buick LeSabre Radius Heat Shield are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Buick LeSabre Radius Heat Shield Parts and Q&A

Q: How to replace the Radius Heat Shield on 2001 Buick LeSabre?
A: Begin power steering gear heat shield replacement by raising the vehicle and supporting it in place followed by removing stabilizer shaft links and rotating the stabilizer shaft downwards. After removing the plastic clip from the power steering gear heat shield you need to uninstall the heat shield's retaining bolts to extract the heat shield. The power steering gear heat shield installation requires placement of the new component so use the fastener notice the tech manual outlines for service precautions. Fasten the heat shield using its retaining bolts to 9 nm (79 inch lbs.) torque before restoring the plastic clip. Reinsert both stabilizer shaft links and lower your vehicle into place.