OEM 2001 Cadillac DeVille Timing Cover

2001 Cadillac DeVille Parts Questions & Experts Answers

• Q: How to replace the engine front timing cover on 2001 Cadillac DeVille?

  A: First remove the drive belt tensioner followed by the drive belt idler pulley bolt after which you must remove the idler pulley itself. Start by detaching the crankshaft balancer along with the right Engine Mount Bracket before removing the engine front cover bolts. Detach the engine front cover while being careful not to discard the gasket unless it shows damage since it can be reused. The installation process starts with applying sealant gm p/n 12345739 or equivalent at the upper and lower crankcase split line before positioning the engine front cover gasket over the crankcase pins to place the front cover exactly. Tighten the engine front cover retaining bolts according to the specified tightening sequence to 10 nm (89 inch lbs.). You should first install the crankshaft balancer and right Engine Mount Bracket and then put on the drive belt idler pulley with its bolt torqued to 50 nm (37 ft. Lbs.). Finish by reinstalling the drive belt tensioner.