How to service and repair the thermostat housing and replace the water crossover on 2001 Cadillac Eldorado?

In order to service and repair thermostat housing and replace water crossover, drain cooling system and take out different parts. Unhook required tubes, take off throttle body, EGR valve, etc. Clean and check water housing crossover and reassemble parts in order making sure of proper connections and finally fill the cooling system.

OEM 2001 Cadillac Eldorado Thermostat Housing

Engine Coolant Thermostat Housing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Thermostat Housing found

View related parts
2001 Cadillac Eldorado Thermostat Housing Part Number: 1647540
$11.19 MSRP: $21.01
You Save: $9.82 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing E; Thermostat Housing Cover; Water Outlet; Housing, Engine Coolant Thermostat
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.4 x 4.3 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1647540
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Eldorado Submodels:
- Base, ESC, ETC, Sport, Touring | 8 Cyl 4.6 L GAS

2001 Cadillac Eldorado Thermostat Housing

With a comprehensive array of OEM 2001 Cadillac Eldorado Thermostat Housing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Cadillac Eldorado Thermostat Housing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Cadillac Eldorado Thermostat Housing Parts and Q&A

Q: How to service and repair the thermostat housing and replace the water crossover on 2001 Cadillac Eldorado?
A: In order to service and repair thermostat housing and replace water crossover, drain cooling system and take out different parts. Unhook required tubes, take off throttle body, EGR valve, etc. Clean and check water housing crossover and reassemble parts in order making sure of proper connections and finally fill the cooling system.