How to replace the MAP Sensor on 2001 Cadillac Seville?

The next step to replacing manifold absolute pressure (MAP) sensor is that you have to switch off the ignition and disconnect the MAP Sensor electrical connector. Next, remove the throttle cable bracket bolts and the bracket as well as the removal of the MAP Sensor from the Intake Manifold. Check the MAP Sensor grommet for wear or damage, in some cases, you may have to replace it. For replacement, insert the MAP Sensor back into the Intake Manifold and reinstall the throttle cable bracket and bolts with 12 n.m (106 lb in) torque. Conclusively, reconnect the MAP Sensor electrical connector.

OEM 2001 Cadillac Seville MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2001 Cadillac Seville M.A.P. Sensor
Part Number: 19418808
$73.36 MSRP: $143.62
You Save: $70.26 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; Valve Assembly
- Replaces: 16249939, 09359409, 12614973, 16187556, 9359409
- Condition: New
- SKU: 19418808
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2001 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS

2001 Cadillac Seville MAP Sensor

With a comprehensive array of OEM 2001 Cadillac Seville MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Cadillac Seville MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Cadillac Seville Parts Questions & Experts Answers

Q: How to replace the MAP Sensor on 2001 Cadillac Seville?
A: The next step to replacing manifold absolute pressure (MAP) sensor is that you have to switch off the ignition and disconnect the MAP Sensor electrical connector. Next, remove the throttle cable bracket bolts and the bracket as well as the removal of the MAP Sensor from the Intake Manifold. Check the MAP Sensor grommet for wear or damage, in some cases, you may have to replace it. For replacement, insert the MAP Sensor back into the Intake Manifold and reinstall the throttle cable bracket and bolts with 12 n.m (106 lb in) torque. Conclusively, reconnect the MAP Sensor electrical connector.