How to replace the MAP Sensor on 2002 Cadillac Seville?

Begin your MAP Sensor replacement by turning off ignition and removing the electrical connection of the MAP Sensor. Start by disconnecting the MAP Sensor electrical connector then remove the throttle cable bracket bolts as well as its bracket from the Intake Manifold before removing the MAP Sensor. Check the MAP Sensor grommet for possible breakdown then replace it if needed during inspection. Placing the MAP Sensor inside the Intake Manifold should be followed by reinstalling the throttle cable bracket with its bolts which require a torque setting of 12 n.m (106 lb in). Reconnect the MAP Sensor electrical connector as the last step.

OEM 2002 Cadillac Seville MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2002 Cadillac Seville M.A.P. Sensor
Part Number: 19418808
$73.36 MSRP: $143.62
You Save: $70.26 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; Valve Assembly
- Replaces: 16249939, 09359409, 12614973, 16187556, 9359409
- Condition: New
- SKU: 19418808
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2002 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS

2002 Cadillac Seville MAP Sensor

With a comprehensive array of OEM 2002 Cadillac Seville MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Cadillac Seville MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Cadillac Seville Parts Questions & Experts Answers

Q: How to replace the MAP Sensor on 2002 Cadillac Seville?
A: Begin your MAP Sensor replacement by turning off ignition and removing the electrical connection of the MAP Sensor. Start by disconnecting the MAP Sensor electrical connector then remove the throttle cable bracket bolts as well as its bracket from the Intake Manifold before removing the MAP Sensor. Check the MAP Sensor grommet for possible breakdown then replace it if needed during inspection. Placing the MAP Sensor inside the Intake Manifold should be followed by reinstalling the throttle cable bracket with its bolts which require a torque setting of 12 n.m (106 lb in). Reconnect the MAP Sensor electrical connector as the last step.