How to replace the emblem or molding on 2001 Chevrolet Astro?

First of all, apply masking tape to the body side border of the emblem or molding to prevent scratches of the surface and align the part while installing. You can use Body Molding Removal Tool (J 41409) or a fishing line that is 0.8mm (0.03in) thick to scrape the material through the adhesive material. Clean the surface for the positioning of the molding or emblem in a dust- free conditions using an appropriate solvent such as the solution consisting of 50 percent isopropyl alcohol and 50 percent water and dry the surface completely. Kept the body part in the temperature range of 27-41°C (80-105°F), heating them if necessary were the third conditions. The emblems's temperature should be between 29-32°C (85-90°F). Put them on a heated surface or into a warm lamp (heat lamp or heat gun will also work). Peel off the protective liner from the molding or emblem, while pressing it to the body surface with an equal pressure along the molding or emblem for a uniform bond.

OEM 2001 Chevrolet Astro Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Emblems found

View related parts
2001 Chevrolet Astro Nameplate, Front Part Number: 88934840
$8.65 MSRP: $12.87
You Save: $4.22 (33%)
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 14.1 x 3.6 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88934840
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Astro Submodels:
- Base, CL, CS, LS, LT | 6 Cyl 4.3 L GAS
View related parts
2001 Chevrolet Astro Emblem, Front Part Number: 88934655
Product Specifications
- Other Name: Emblem Kit, Radiator Grille And Front End Ornamentation
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 7.8 x 3.0 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88934655
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Astro Submodels:
- Base, CL, CS, LS, LT | 6 Cyl 4.3 L GAS
View related parts
2001 Chevrolet Astro Nameplate, Outer Part Number: 15724741
Product Specifications
- Other Name: Plate, Cab And Load Carrier Outer Side Decoration; Plate Assembly, Cab And Load Carrier Outer Side Decoration; Plate, End Gate And Rear Door Decoration
- Position: Outer
- Item Weight: 0.30 Pounds
- Item Dimensions: 9.6 x 2.0 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15724741
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Astro Submodels:
- Base, LS, LT | 6 Cyl 4.3 L GAS
View related parts
2001 Chevrolet Astro Nameplate, Outer Part Number: 15724742
Product Specifications
- Other Name: Plate, Cab And Load Carrier Outer Side Decoration; Plate Assembly, Cab And Load Carrier Outer Side Decoration; Plate, End Gate And Rear Door Decoration
- Position: Outer
- Item Weight: 0.40 Pounds
- Item Dimensions: 16.0 x 1.9 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15724742
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Astro Submodels:
- Base, LS, LT | 6 Cyl 4.3 L GAS

2001 Chevrolet Astro Emblem

With a comprehensive array of OEM 2001 Chevrolet Astro Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Astro Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Astro Emblem Parts and Q&A

Q: How to replace the emblem or molding on 2001 Chevrolet Astro?
A: First of all, apply masking tape to the body side border of the emblem or molding to prevent scratches of the surface and align the part while installing. You can use Body Molding Removal Tool (J 41409) or a fishing line that is 0.8mm (0.03in) thick to scrape the material through the adhesive material. Clean the surface for the positioning of the molding or emblem in a dust- free conditions using an appropriate solvent such as the solution consisting of 50 percent isopropyl alcohol and 50 percent water and dry the surface completely. Kept the body part in the temperature range of 27-41°C (80-105°F), heating them if necessary were the third conditions. The emblems's temperature should be between 29-32°C (85-90°F). Put them on a heated surface or into a warm lamp (heat lamp or heat gun will also work). Peel off the protective liner from the molding or emblem, while pressing it to the body surface with an equal pressure along the molding or emblem for a uniform bond.