How to replace the clutch release bearing on 2001 Chevrolet Camaro?

To replace the clutch Release Bearing, removing the manual transmission and then rotating the clutch Release Bearing in either direction, releasing the compression spring load to force the bearing off end of the clutch actuator cylinder. When fitting the new clutch Release Bearing, make sure that the quill is cleaned using a clean dry cloth and do not use any cleaners or chemicals on the quill at all, do not grease the quill or the new bearing as it's pre-greased. Push firmly on the new clutch Release Bearing to place it until it snaps over the retainer tab into actuator cylinder while reinserting the manual transmission.

OEM 2001 Chevrolet Camaro Release Bearing

Clutch Release Throw Out Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Release Bearing found

View related parts
2001 Chevrolet Camaro Release Bearing Part Number: 15705563
$58.12 MSRP: $109.13
You Save: $51.01 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Clutch Release; Clutch Release Bearing; Clutch Kit
- Item Weight: 1.00 Pounds
- Item Dimensions: 4.3 x 4.1 x 2.2 inches
- Condition: New
- SKU: 15705563
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2001 Chevrolet Camaro Submodels:
- Base, RS, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS

2001 Chevrolet Camaro Release Bearing

With a comprehensive array of OEM 2001 Chevrolet Camaro Release Bearing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Camaro Release Bearing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Camaro Release Bearing Parts and Q&A

Q: How to replace the clutch release bearing on 2001 Chevrolet Camaro?
A: To replace the clutch Release Bearing, removing the manual transmission and then rotating the clutch Release Bearing in either direction, releasing the compression spring load to force the bearing off end of the clutch actuator cylinder. When fitting the new clutch Release Bearing, make sure that the quill is cleaned using a clean dry cloth and do not use any cleaners or chemicals on the quill at all, do not grease the quill or the new bearing as it's pre-greased. Push firmly on the new clutch Release Bearing to place it until it snaps over the retainer tab into actuator cylinder while reinserting the manual transmission.